You can prune the first pair of buds on Hydrangea macrophylla, Hydrangea serrata, Hydrangea quercifolia, and Hydrangea aspera in the spring. In essence, you are removing the dried flower heads. By removing one or two of the oldest, largest stems, you can also help the plant become more open and give off a better shape. To promote fresh growth, cut these right back to the ground.
Hydrangea aborescens and Hydrangea paniculata can be clipped back more severely after flowering since flowers appear on fresh growth. These kinds don’t truly require pruning, although you can do it to prevent them from becoming too tall.
Which month do you prune back hydrangeas?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Do hydrangeas require pruning?
When should I prune my hydrangeas? is one of the most often asked gardening topics. We all have a tendency to want to hurry outside with the clippers and start hacking away when those billowy large flowers change from cheerful blues, purples, pinks, reds, and whites to uninteresting browns.
When to Cut Back Hydrangeas
The timing will vary according on the variety of hydrangea you have. First of all, be aware that hydrangeas do not require pruning unless the shrub has become unruly or too big for its location and requires some shaping up. Otherwise, simply deadhead wasted blooms and remove any dead branches from the plant.
How to Prune Hydrangeas02:07
But if you do decide to prune one, bear in mind to time it so that it blooms on old wood or new wood depending on the species of hydrangea you have.
If you wait too long, you can chop off the buds that are developing on old wood (stems from the year before the current summer), which would prevent flowers from blooming the following spring. Therefore, as soon as the flowers on these bushes have faded, they should be clipped.
The shrub should be clipped in the early spring before that new growth appears, but, if the shrub flowers on fresh wood (stems generated during the current season), which means that its buds are set inside the season.
When and how should hydrangeas be pruned?
Before performing any significant “hard” trimming, let these plants grow for one or two seasons. Depending on whether you want a smaller or larger shrub, prune these hydrangeas in the spring to the ground or not at all once the shrub is established and has had a few growing seasons. On the growth from this season or fresh wood, flower buds will develop.
Favorite smooth hydrangeas include:
- (H. arborescens ‘NCHA7’ PP30,358) Invincibelle Mini Mauvette
- (H. arborescens ‘Abetwo’ PP20571) Incrediball
- The Annabelle tree (H. arborescens)
What occurs if your hydrangeas aren’t pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Should I remove the brown blooms on my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
Do I need to remove Brown hydrangea blossoms in the winter?
Myers advises leaving the dried blossoms on your hydrangeas if you’re looking for an easy way to spice up your winter yard. Bigleaf hydrangeas produce their final rush of flowers in the fall, so to enjoy the dried blossoms all winter long, stop deadheading at that time. To aid in the production of healthy buds in the spring, these can be removed.
Can I prune my hydrangeas all the way down?
These hydrangeas are simple to manage because they bloom each year no matter how they are taken care of or treated. They can be cut down to the ground in the fall and will reappear the next spring with an abundance of blossoms. However, over time, this severe trimming might make the plant gradually weaker.
Where are hydrangeas cut?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
When should dead hydrangea blossoms be removed?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.