In the late winter, early spring, or just above a big bud known as a heading cut, trim back stems. The flower heads of these plants have a conical form. I wait to prune these until late winter or spring because I advise leaving the dried, tan flower heads on the plant to add some winter beauty to your garden. Favorite panicle hydrangeas include:
- H. paniculata ‘Bulk’ PP16, 812, Quick Fire
- (H. paniculata ‘Limelight’)
- Berry White (H. paniculata ‘Renba’ PP28, 509) first editions
When do hydrangeas need to be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How should a hydrangea be pruned, step by step?
Simply put, old wood is wood from the previous year. On stalks that have been part of the plant since the previous year, flower buds on hydrangeas that bloom on old wood are set in the late summer.
The mophead, bigleaf (macrophylla), lacecap, and oakleaf kinds of hydrangea bloom on ancient wood.
These gorgeous shrubs require very little pruning. If you must, though, knowing when and where to trim is crucial. That’s because the less flowers you have the following summer, the more old wood you take.
To keep your old wood hydrangeas healthy and vigorous, take the following three steps:
- Pruning flowering stems back to a pair of sound buds should be done as soon as possible after blooming, but no later than July.
- Remove weak or broken stems during the winter or early spring pruning. The oldest stalks should only be removed in thirds, cutting them to the ground.
- To maintain the shape of your shrubs and revitalize them, repeat the method each summer.
How far back may a hydrangea shrub be cut?
You can prune hydrangeas paniculata and aborescens more severely without losing this year’s blossoms because they bloom on new wood. Although pruning is not necessary, if it is not done the plant will grow taller, with the majority of its flowers at the top.
Cut back to a healthy framework
Trim the previous year’s growth back to a strong framework that is between 30 cm and 60 cm high in the early spring. On each stem, prune to just above a pair of sound buds. For large flowers, prune back to the lowest healthy buds; less firmly for a more natural appearance or a higher plant.
Watch Monty Don describe the many hydrangea trimming techniques in spring:
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Where are hydrangeas cut?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
Are hydrangeas intended to have deadheads?
Correctly and timely deadheading your hydrangeas only benefits these plants in the long run. Deadheading is the technique of removing wasted flowers from a plant to promote greater blooming later on, much like trimming. Professional gardener Melinda Myers notes that deadheading encourages the plant’s energy to flow into the leaves, stems, and roots (rather than developing seeds) for future growth.
According to Myers, deadheading your hydrangeas provides cosmetic advantages in addition to enhancing the future blooms. She says that many gardeners prefer the neat and tidy impression that faded blooms create to that of dried flowers left on the plant. The species of your hydrangeas will determine when and how to deadhead them, according to Myers. Here is her response to our question regarding the ideal moment and technique for harvesting finished flowers from several varieties of hydrangeas.
When should dead hydrangea blossoms be removed?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
Does fresh or old wood produce flowers for hydrangeas?
Smooth hydrangeas are easy to grow and exceptionally cold tolerant; they are native to the southern United States. This species, which is frequently misidentified as an Annabelle hydrangea, has enormous, spherical flower heads that are colored white, pink, and green.
Ideal Conditions for Smooth Hydrangeas
A position with some shade is necessary for smooth hydrangea to flourish. Plants benefit from morning light or bright shade for blossoming while being shielded from the scorching afternoon sun. Drought is a threat to plants, and they thrive under conditions of consistent wetness. a great inclusion in woodland gardens and mixed borders, or hidden beneath perennials.
Pruning Smooth Hydrangeas
On fresh wood, smooth hydrangeas blossom. In order to promote profusion of blooms and keep plants at a reasonable size, plants are frequently cut back to the ground in late winter or early spring. Cut some of the stems to the ground and leave others with varied lengths, between one and two feet, if a larger shrub is desired.
Is the wood on my hydrangea old or new?
Identifying whether hydrangeas will bloom on old wood or fresh wood is the first step in figuring out the optimal time to prune them. Here is a list of each definition; we explain which is which below. (We assure you that this is not as horticulturally nerdy as it sounds.)
“Typically pruned after flowering or early fall to promote new flower buds on old stems, old wood refers to buds that form for next year’s bloom at the end of the current growing season on stems created during the previous summer.
“Stems that have grown during the current growing season are referred to as new wood. During the current growing season, buds begin to form on this new growth. In order to promote new stems, pruning is typically done in late winter or early spring.
Don’t worry if your time is off. These plants are tolerant. Without blooming for a season, you might still anticipate flowers the next year if you plan ahead.
Hydrangeas should be pruned at a 45-degree angle just above a blossom. Typically, a leaf or leaves are linked to the stem at this location.