You’ll undoubtedly want to maximize every shred at your disposal whether you purchase cannabis commercially or produce your own at home. It just makes sense to use your marijuana wisely since you paid good money for it.
Due to this, it’s not unusual for experienced stoners to spend a lot of time (and do so quite appropriately) cleaning every last bit of sticky residue out of their bongs and pipes in order to recycle them. It’s also the reason you’ll regularly come across people who claim that consuming tainted bong water is completely harmless.
On the surface, there seems to be some logic to the idea that bong water has some use. Small amounts of THC and CBD are left behind as the smoke goes through the water. Also, wouldn’t bong water be the best option for watering your plants if it contains decomposing plant stuff, as it undoubtedly does.
The uncertainty around bong water is as old and persistent as the hills, troubling both novice growers and seasoned cannabis connoisseurs. So, once more, we decided to address the matter head-on by responding to a few crucial queries about whether and how you can utilize unclean bong water.
Can You Drink Water From A Dirty Bong? First off, we recently wrote a full article only about this issue. No matter what you may have read or heard from other stoners or what you may have seen online, ingesting unclean bong water is never a good idea. You should never, ever consume bong water, not even as a dare or in the most desperate of circumstances.
One thing to keep in mind is that no amount of bong water can ever make you feel high. Purely from a scientific standpoint, it is not possible for the water in your bong to absorb enough THC to have any kind of noticeable impact. If you drank several litres of the substance at once, you might get a buzz, but you would also become more ill than you have ever been in your life.
Additionally, dirty, stagnant bong water is a haven for various viruses, germs, and other pests. Don’t do it; it’s one of the dirtiest things you could possibly grab for and consume.
Can Bong Water Be Used to Water Plants? Unfortunately, your plants’ health and your own health pretty generally follow the same course. Bong water may contain decaying plant materials, but it also contains a lot of germs and bacteria that might destroy your plants instantly. Additionally, the pH level of unclean bong water is frequently on the acidic side, which is harmful or fatal to plants.
There are numerous anecdotes of growers and farmers watering their plants with bong water and getting nothing but good outcomes. But once more, science portrays a very different picture, one in which it is evident that watering plants with bong water is a poor idea.
How to handle old bong water You shouldn’t be consuming bong water or using it to water your plants. But is there anything you can do with bong water that is useful?
The positive practical uses of bong water are actually quite limited.
Given that the bacteria and plant debris in the mixture may aid in the natural decomposition process, you can try adding it to your compost pile.
However, there is also no proof that bong water affects composting in either a good or bad way.
Therefore, you might as well carry on as sane stoners have for generations for the time being. Without a second thought, flush that disgusting material down the toilet!
Where do I discard the water from my bong?
Every time, this simple and reliable strategy is successful. If you wish to prevent getting any sticky substance on your fingers, you can put on disposable gloves before starting these instructions.
- Take away the stem and bowl. You place your cannabis on the section with the stem and bowl. This portion can be removed, which makes cleaning the bong much simpler. When you pour the bong water out, you should try to avoid getting the bowl wet.
- Throw away the used water. If at all possible, avoid pouring bong water down the drain because it is sticky and resinous. If you have a trash bag that is properly sealed, you can pour it into the garbage, or you can pour it into a sealed container to toss away. You can also empty your bong water outside, but you shouldn’t use it to water any plants. Your plants will be harmed by the same germs and mold that can hurt you.
- Put the bong in a bag with a zip cover. The mess can be contained by using a sizable gallon-size bag, which should be big enough. The next actions can be carried out over your sink or inside a garbage bag if you don’t have a zip-top bag on hand. Just be cautious because the bong resin could adhere to the sink’s sides.
- Isopropyl alcohol should be added to the bong’s inside. You should fill the bong’s top with your isopropyl alcohol. Depending on the size of your bong, use about 16 ounces or just enough alcohol to fill it halfway. Pour that into the bong if you’re using an isopropyl solution designed specifically for cleaning bongs. You can also use baking soda and white vinegar as a substitute for isopropyl alcohol. Just give it more time to soak.
- the bong with salt. This salt aids in gently scrubbing the resin out of the bong’s interior. Alcohol alone does a passable job of cleaning it, but salt gets rid of the buildup on the bong’s sides. Use a sufficient quantity so that the salt can effectively scrape the resin off.
- Shake after sealing the bag. Seal the bag before shaking the alcohol and salt mixture inside the bong because this part can get messy. Make sure the mixture penetrates all the chambers of your percolator bong. To get all the crevices, you might need to tip the bong upside-down a few times.
- Give it a 30-minute soak. For around 30 minutes, let the alcohol mixture and the bong sit together. Depending on how dirty you let your bong become, this step may not always be essential, but soaking it improves the alcohol’s ability to clean your glass.
- Dispose of the bag after removing the bong. The bag is essential since you can easily seal it up with contaminated bong water and discard it. This prevents the sink’s resin mess.
- Use warm water and soap to rinse the bong. Before utilizing the bong, it is preferable to remove all of the alcohol and salt, especially since alcohol is combustible. Any remaining oil on the glass can be broken down with dish soap and warm water.
- To clean the bowl and stem, soak them in alcohol. To remove any resin that has become attached to the stem, use a pipe cleaner. Before using it with cannabis, give it a thorough rinse in hot water and let it to air dry fully.
What exactly is in bong water?
A fundamental element of the cannabis smoking experience is the bong. A bong is a smoking device containing a bowl for dried marijuana and a chamber filled with water. It is sometimes referred to as a water pipe or bubbler. Water cools and filters the smoke as it bubbles up through it. Smooth cannabis smoke is the end result, with barely detectable traces of tar and ash.
You might be wondering what’s in the water as the filtration system purifies the smoke. You’ll discover exactly what could be present in your bong’s water in this article, along with the reasons it’s critical to regularly change the water and maintain your bong clean.
How contaminated is bong water?
“Wait a second, do you mean that pond water is just as nasty as unclean bong water? No, but it’s still a lot closer than you ought to feel at ease. Take a look inside the tube the next time you leave your bong water out for longer than a day. You might notice a coating that has developed on the water’s surface. A biofilm is what this is, and it’s unhealthy for your body. In essence, what you are seeing is a miniature biodome. The difference is that it protects the growth of bacteria, viruses, yeasts, and other microbes instead of producing a tiny bubble for a tiny Paulie Shore to create some tiny problems.
Why would you invite infections directly into your lungs if you take the time to wash your hands to prevent them from getting into your mouth in the first place? Infected bong water can support the growth of fungus like black mildew as well as bacteria like Strep and E. coli. They can result in emphysema, pneumonia, strep throat, and more when inhaled. The more times you smoke from the same water, the greater the possibility that these germs may move throughout your body and reproduce.
What happens if you don’t replace the water in your bong?
Yes, unclean bong water can make you sick, to put it succinctly. The longer response, though, is that this is more of a problem with polluted water than it is with cannabis. Don’t consume contaminated water. In unclean water, you wouldn’t bathe. Bong water is no different from other dirty water in that it is a refuge for bacterial growth. If left unmanaged, it might develop into a microorganism breeding ground. Stasis water can contain viruses like E. Coli and Hepatitis A, which you definitely don’t want to breathe in. It would also be in your best interest to avoid doing so if you have ever been persuaded to consume tainted bong water.
However, there are other things that do emerge from cannabis going through your bong water in addition to common diseases. For instance, when burned, the fungus Aspergillus that develops on cannabis plants decomposes into mycotoxins. Lung disease can be caused by inhaling mycotoxins. It may be tempting to put off cleaning and simply light up in that filthy bong, but cleaning it out first is crucial.
How often should a bong be filled with fresh water?
Water in bongs should be changed at least once daily for heavy cannabis users. Similarly, rinsing your dry pipe or bubbler with boiling water prior to each use helps reduce the amount of ash particles and any germs you breathe in.
Before each new strain or before each smoke session, some enthusiasts change the water in their bong and bubbler in order to get the greatest flavor from their ground marijuana or concentrates.
This may seem excessive to the average consumer. However, it’s a good idea for the casual user to properly rinse their bong with recently heated water after each usage.
Before storing it till the next time, let your bong or water pipe dry fully outside. Each time you use your bong or pipe, make sure to fill it with fresh water.
Daily users should, at the very least, replace the water in their bongs every two to three days. Those who reside in hot, dry climates might be able to wait up to one week, although this is not advised.
Heavy users are also advised to clean their bongs every seven to ten days with salt and alcohol to remove resin buildup that cannot be removed with hot water.
Remember that differing conditions could promote the growth of mold and mildew. If your piece contains water, be sure to store it in a warm, dry, and hygienic environment.
Although cleaning a bong can be a pain, it is essential for your health as well as the quality of your sessions. Invest in a reliable bong cleaner to accelerate the cleaning procedure. There are two excellent products out there that can help you preserve a nice and clean bong for each session: Piece Water Solution and Reslution.