Bamboo stakes and coir or moss poles are the two most common types of garden stakes for indoor plants. Stakes made of bamboo are inexpensive, beautiful, and simple to handle. They are incredibly versatile and have thin diameters. Coir (coconut fiber) poles are made of hardwood bases covered in coconut husk and are noticeably thicker. Because the coconut husk is so absorbent, you may water right onto the pole and your plant will benefit from the humidity. Moss poles, which resemble coir poles but are typically covered with sphagnum moss, are another well-liked option.
Insert The Stake Into The Soil
Locate the parts of your Monstera that contain the thickest, heaviest stems and require the most support at the base (bottom). Once you’ve located these spots, dig a few little holes with a trowel and insert the stakes there. Make sure the stake is firmly planted in the ground and buried deep enough to prevent wiggle or sag. For further support, drive the stake all the way into the Monstera plant’s pot.
Utilize Support Ties
When staking plants, special support ties are not required. You can use cloth strips, twine, or plant tie tape. Just make sure that you don’t connect the Monstera stems to the stakes too firmly so as to injure them. They ought to be firmly fastened but not choked.
About one to two inches above the point where the base of your plant meets the soil, start attaching your support ties. Your plant will be able to stretch upward more readily as it grows if it has more support at its base. Repeat the ties at several-inch intervals (about every three to eight inches, depending on the size of your Monstera).
And That’s That!
You’ll see an improvement in your Monstera’s overall form and health now that it has been staked, and its epiphytic nature will have more room to flourish. The future will be bright for you and your Monstera if you use our comprehensive care guide to keep your plant healthy over time and add more support ties or stakes when required.
Does Monstera require assistance?
Over time, a mature Monstera increasingly generates heavier, bigger leaves. Without assistance, these leaves will start to bend the stems under their weight. The stems typically lay on the floor or another accessible surface as gravity progressively weighs them down.
The pot could break the stem or topple over if the weight of the leaves grows too great. It is therefore advisable to stake an older Monstera and provide it with the support it requires.
Option 1: Moss pole plant support
This option is the most popular since it most nearly resembles the monstera’s natural surroundings and because it usually complements the monstera’s natural shape.
All species of monstera plants, including the tiny adansonii and micro monstera (which isn’t a monstera, but who cares?) work nicely with moss poles. to the delicious monstera that is monstrous.
The aerial roots of the monstera are supposed to naturally cling to the moss in the same way as they would naturally cling to a moss-covered rainforest tree in the wild.
When the plant is young and not yet spreading, it is better to put a moss pole.
With an older, more unruly plant, you can still use a moss pole, but you might need to bind the monstera’s vines to the pole with soft twine or twist ties first until the aerial roots begin to cling to it naturally.
Moss poles are available already constructed at garden supply stores or online, or you may make your own!
How should a Monstera be braced?
Next, position the pole so that it lays between your plant and the plant pot’s rim.
Ensure that the stake’s bottom touches the pot’s bottom. This gives the pole stability and keeps your Monstera plant from causing it to topple over.
Firm the soil around the pole
This is a critical step because if the soil around the stake is not firmed up, the stake will become unstable and be vulnerable to squirming or toppling over when your plant is bearing down on it. It’s crucial to anchor the pole in its current location for this reason.
How do you increase support for Monstera?
Since cheese plants are epiphytes, they are vertically growing plants that rely on the support of surrounding plants. Therefore, growing cheese plants on a moss pole is a great imitation of how they naturally grow. For cheese plants, moss poles provide both the environment it requires to lift its heavy stem upright and an attractive aesthetic.
A sturdy stake that is a little bit taller than the plant is required. Cut a piece of fine mesh wire just big enough to wrap around the stake using wire snips. The wire mesh hoop around the wooden post is securely fastened with wood staples. Use sopped sphagnum moss to complete this cheese plant support. The moss should be pushed into the mesh to fill in the area around the stake.
Without the stake, you may easily create a Monstera moss pole by just filling a mesh tube with the moss and securing the edges, although I believe the stake increases the solidity. Philodendron stems can grow to be quite big and hefty.
What causes my Monstera to topple over?
Due mostly to its spectacular leaves, the Monstera deliciosa (Swiss Cheese Plant) is a common houseplant. Although they are simple to care for, these fellas do have one drawback: if they feel neglected, they have a tendency to pout, which may cause your Monstera leaves to droop. Don’t panic too much. They can quickly be persuaded to recover with a little loving attention.
The most frequent cause of drooping monstera leaves is dehydration. They prefer their soil to always be just moist enough. Other contributing factors include overwatering, poor lighting, issues with fertilizer, pests, or transplant stress. The most crucial step in restoring your plant to health is figuring out what the issue is.
What can I do about my lanky Monstera?
Like all plants, a Monstera deliciosa can become sparse and lanky from a lack of sunshine. The issue itself is simple to identify, but how can you put a stop to it? How do you mend a Monstera that is “leggy” and what does that mean?
When a Monstera doesn’t receive enough light, it becomes leggy and becomes elongated and sparse. Once a leggy Monstera has been identified, it can be treated by cutting back the leggy growth and making sure the plant continues to receive enough sunshine going ahead.
It can be frightening whenever your plant starts to appear less than healthy. Leggy, fortunately, is a simple problem to resolve. So don’t be afraid! Continue reading to learn what the issue is, how to resolve it, what kind of light a Monstera requires, and how to accommodate Monsteras in low-light conditions.
My Monstera should I trellis it.
I frequently get asked how I take care of my monstera, so I thought I’d provide some information about it here, along with affiliate links to some of the things I use and like. Using these links to make purchases helps support this blog.
Do I need to train my Monstera deliciosa?
Yes! The Monstera deliciosa grows in a manner akin to a pothos vine that just keeps getting longer. Pothos can be allowed to dangle off the side of the pot due of its smaller overall size. A few vines hanging out of the pot would swiftly fill an entire room because the monstera’s natural size is significantly larger! As a result, you should attach the vines to a reliable trellis so they may climb it.
What about using a moss pole?
The purpose of the moss pole is to offer a surface for the aerial roots to adhere to, just like they would in the natural. The only issue with attempting to do this indoors is that you have to constantly keep the moss damp. Since the air doesn’t move as much as it does outside or in a nursery, this is not advised. Mold and undesirable microorganisms thrive in stagnant air and perpetually damp environments.
A monstera’s vine can be rather heavy, even if you are successful in keeping the air clean. A single post trellis won’t be as reliable as one with multiple posts.
The Metal Trellis
Attaching my monstera vines to a strong metal trellis, such as the Panacea Garden Ladder, is how I train my plants. It is far more sturdy thanks to the triangular profile than a flat, fence-like form. Panacea Garden Plant Support Ladder, Red, from Amazon
Soft Rubber Ties
Even if wires or thread will eventually pierce the monstera vine’s strong skin, I find that this will happen. I do this by using these Soft Rubber Ties. They won’t damage the plant, are sturdy, and won’t slip after they’ve been twisted against one another. They are simple to trim to the length you require. Link to Soft Rubber Tie on Amazon (Brown) Link to Soft Rubber Tie on Amazon (Light Green)
The vines usually won’t dangle off the side of the container for a few months when your monstera is young, straight from the nursery. When provided with adequate light and moisture, those vines will appear to crawl outwards; at this point, you should secure them to a trellis.
Are moss poles required for Monstera?
Although Monsteras can flourish without a moss pole, including one more closely resembles their natural habitat. As epiphytes, monsteras rely on the support of tree trunks to flourish. They cling by inserting their aerial roots into the structure’s framework. You may create a more natural growing environment for your Monstera indoors with the aid of a moss pole. By clicking the image or link, you can check the price on Amazon.
How are Monstera aerial roots trained?
You must fasten the Monstera to the moss pole once it is in the pot with the plant!
This will be a little simpler if your plant is still a young one. Tie the Monstera’s stem to the pole without pulling or bending excessively, making sure the nodes touch the wet moss. As a result, the aerial roots will be encouraged to encircle and grow into the moss pole.
This technique might need to be repeated whenever there is fresh growth. You can cut or loosen the ties once the aerial roots of the Monstera are securely fastened to the moss pole.
Your Monstera might not want to bend as much to attach to the moss pole if it is already pretty mature. This will require that you go extremely gently. Once the stem is up against the moss pole, tighten the ties every week to continue dragging it in that direction.
If the aerial roots of the Monstera are particularly lengthy, it can be beneficial for you to prune portions of them back. It will be more difficult to train them onto a support the longer they are. The aerial roots will generate more roots if you cut them close to the node; these roots will then develop into the moss pole.
Mist the Moss regularly.
The moss pole will draw the air roots of Monstera naturally, but only if it is moist. Regular misting of your moss pole will help your Monstera absorb extra moisture for its large, attractive leaves.
Use VELCRO garden tie.
VELCRO garden ties are a fantastic solution for securing your Monstera to the moss pole. There is no need to be concerned about tying a knot that will be strong enough because these plant ties attach to themselves. They are simple to put on and take off, and they won’t harm your Monstera’s stem.
The stems can also be attached to the moss pole using cable tie (zip tie). At least until the support begins to get hugged by the aerial roots. I performed this procedure on my Monstera Adansonii.
How can you use a moss pole to support Monstera?
Those of you who have a Monstera deliciosa at home may have picked up on a few things since bringing it in. One, aren’t those leaves gorgeous? Two, it’s actually expanding quite swiftly. Third, M. deliciosa doesn’t comprehend the need of having sound personal limits. Give this adorable giant of a houseplant a moss totem to grasp onto if you find yourself outgrowing your home. Here, we’ll walk you through the installation process and show you how to control some of your monster’s adorable excitement.
M. deliciosa uses its powerful aerial roots to cling to and take moisture from the rough bark of large rainforest trees in its natural habitat. It is a natural wanderer. A moss totem is an upright pole that is completely covered in sphagnum moss and is staked into the plant’s pot. Its natural surface provides something for a monstera’s roots to grip onto and take moisture from, acting as a stand-in for a tree. A moss totem allows M. deliciosa to act more like it would in the wild while yet supporting those heavy stems and leaves better than a traditional plant stake or wire trellis.
With just a few basic tools, you can train a monstera to a moss pole:
- Your terra cotta monstera
- a ready-made moss totem
- Soft plant ties, yarn, or cotton string are good options for gentle ties.
- A new container that is 1-2 wider than the old one, together with high-quality potting soil for houseplants, if repotting is required.
We like Mosser Lee’s Totem PoleTM Extendable Plant Supports for moss totems. These realistic-looking, tube-shaped supports come in three lengths plus an additional 12 extensions for when your monstera inevitably becomes even bigger. They are packed with moisture-absorbing, long-fiber sphagnum moss.
Getting Started
Start by putting the moss totem in a shallow water container and letting it soak until it is completely soaked.
Before adding the totem, it’s a good idea to check your plant to see whether it has to be repotted while the moss is soaking. You can install the moss totem without repotting your M. deliciosa if the pot is large enough and the roots aren’t too crowded. However, if your plant needs a new pot anyhow, now is a fantastic time to start working on its new totem.
If your monstera has to be repotted, start by removing it from its current container and looking at the roots. If the roots are tightly packed, you may need to loosen them up a bit. As you normally would, repotter the plant into a new pot with fresh soil; however, instead of placing it exactly in the center, move it slightly toward the front of the pot. With the majority of the foliage facing outward, the moss totem can fit behind the plant in this manner.
Installing the Totem
When the plant and container are prepared, deeply embed the strong metal supports at the bottom of the moistened moss pole. Keep the pole upright and tuck it behind the plant just a bit. The totem can then be stabilized by lightly pressing the earth at the base.
Attaching the Plant to the Pole
It’s time to acquaint your plant with its new totem now. Some of your monstera’s stems may be longer and more strong than others, as you may have noticed. Several huge leaves are supported by these thicker stalks, and they may also be beginning to sprout some knobby aerial roots. The stems could potentially start to spread out from the pot like a vine as they develop horizontally. The more slender leaf stalks and their leaves will be allowed to fill in around the bottom once you attach these stems to the totem.
Bring the stem up against the moistened moss and fasten it gently yet securely with a piece of soft plant tie, twine, or cotton string to help it adhere to the totem. If the stem is long, bind it to the totem by tying it to it several times. Repeat this process with any other substantial stems, then take a step back to ensure the plant’s general form is to your liking. Your M. deliciosa will eventually use its aerial roots to cling to the moss and proceed to climb higher on its new support.
Care Tips
With one extra step, caring for a monster on a totem is just like caring for one without. Misting the moss on occasion is a smart idea to keep your monstera interested in its new support. The roots will continue to spread into the moss if the plant detects moisture there.
For routine maintenance, make sure the container drains effectively, let the top inch or two of soil a little amount of soil dry out between waterings, and set your plant where it receives lots of bright, indirect light. Additionally, take sure to turn your wandering plant every so often to keep things balanced if it tends to lean one way or the other while looking for the best source of light.
Some Plants Just Need a Little Guidance
Not just monsteras are helped by a little patient correction in the home. A moss totem is also helpful with other monster species, such as M. adansonii, as well as some philodendrons, like “Prince of Orange” and “Pink Princess.” Ask if you need help caring for any of your “wandering plant pals.” We are always happy to assist.