Echinacea is simple to grow once it is established in the landscape, but growing it can be difficult at times, especially when it comes to overwintering. Here are some pointers for effectively overwintering echinacea.
The majority of the echinacea we transport in the spring overwintered here in bare-bones homes. Here are some advice from our farmers on how to effectively overwinter echinaceas if you are receiving them in the fall.
Temperature
Keep them at a steady temperature of 45 degrees F in our 50mm Elle Plugs or 38 to 40 degrees F in gallon containers. Larger containers are typically preferable for overwintering echinaceas.
Disease Management
We advise performing one preventative fungicide drench right after transplanting and then another drench approximately 14 days later if you intend to pot the plants up into 1-gallon containers, grow them on for a while, and then let them go dormant. This will safeguard the plants when they enter dormancy. As the plants begin to become dormant, be careful to keep an eye out for botrytis and keep the dead leaves off the plants. By keeping an eye on when and how much the plants are watered, botrytis can be reduced to a large extent.
How is echinacea prepared for winter?
The ideal course of action would seem to be to prune all of your perennials in the fall. I see why you would want to trim down the perennials and get ready for the upcoming Christmas season—you have lovely fall weather, you’re already raking leaves, etc. Unfortunately, our desires and the needs of our plants are not always the same. Here are some common queries about perennial winterization answered.
Depending on what you have planted in your garden, the process of effectively winterizing your perennials can frequently take place from late October into the first few weeks of spring. The most important thing when cutting perennials for the fall is to take your time.
A plant’s leaves are what give it life, so they should never be entirely clipped until after several hard frosts. It is possible for the plant to absorb the additional energy it requires by letting it naturally wither away. The plant moves its energy from the dying foliage to the roots, where it will be stored for the winter and used to grow a new, attractive plant in the spring. By pruning a perennial too soon in the fall, you run the risk of weakening it and having it perform poorly the next year.
The perennial variety will determine when to prune, but there are primarily 3 categories to consider:
- After the deadly frost, thoroughly prune the tree.
- In the spring or fall, prune to the base of the leaves.
- Never prune in the fall (prune or clean up in spring)
1. After the fall killing frost, totally prune the tree. Although pretty self-explanatory, be aware that this process could happen at any time between mid-October and December.
- When the foliage turns black, cut the anemone (Anemone x hybrid) to the ground.
- When the beebalm (Monarda) dies back, cut it to the ground. Occasionally, if powdery mildew is a serious infestation, this may need to be reduced early.
- Nepeta catmint should be cut down when the foliage turns brown.
- Cut down Cranesbill (Geranium) when the foliage turns brown.
- Hemerocallis daylily, cut to the ground as the leaf turns brown.
- Cut Hosta (Hosta) to the ground once the leaf has withered.
- Cut the iris (Iris sibirica) to the ground when the leaf withers or leave it for winter interest and trim it back in the spring before the new growth appears.
- When the foliage dies down, cut the peony (Paeonia) to the ground.
- Cut to the ground Sedum (Sedum) as the foliage dies back, or leave for winter interest and trim in the middle of winter or in the first few weeks of spring before new growth starts.
- When the foliage on tall Phlox (Phlox paniculata) dies back, cut it back to the ground.
- When the foliage on Threadleaf Coreopsis (Coreopsis verticillata) dies back, cut it back to the ground.
2. Completely prune in the spring or fall to the base foliage. A structure’s base is referred to as its basal. In its simplest form, basal foliage is fresh foliage that emerges at a plant’s base.
- Susan the Black-Eyed (Rudbeckia) For the benefit of wildlife, leave the seed heads up in the winter. In the spring, just wipe off the remaining leaves and cut the stems back to the basal foliage.
- Campanula (Bellflower): In the fall, prune back to the basal foliage.
- Coneflower (Echinacea)
- For the benefit of wildlife, leave the seed heads up in the winter. In the spring, just wipe off the remaining leaves and cut the stems back to the basal foliage.
- Penstemon (Penstemon digitalis) should be pruned in the fall to the basal foliage.
- Trim the stems of the Shasta Daisy (Leucanthemum) to the basal foliage in the fall, and then in the spring, only remove any leftover foliage.
- In the fall, cut back yarrow (Achillea) to the basal foliage.
Avoid pruning in the fall (prune or clean up in spring). Some perennials simply benefit from having more leaf on top in the fall to protect the plant’s crown, but evergreen and woody perennials should never be cut back.
- Aster (Aster) In the spring, before the emergence of new leaf, totally prune.
- Before the new leaf emerges in the spring, fully prune the asters.
- Monarch Butterfly (Asclepias tuberosa)
- It’s not necessary to wait until spring to cut this back, but because it blooms later than most other perennials, it’s usually simpler to leave it alone so that it can freely reproduce. In order to avoid mistaking the new seedlings for weeds come spring, you’ll need to know where it was in your garden.
- Although it is not required to wait until spring, Cardinal Flower (Lobelia cardinalis) benefits from the additional leaves on top to help protect the plant’s crown.
- Camembert Pinks (Dianthus gratianopolitanus)
- Simply remove the dried flower stalks and any untidy foliage in the spring after they bloom because these have evergreen foliage.
- Coralbells (Heuchera) have evergreen foliage, so in the fall, cut the flower stems to the base foliage, and in the spring, tidy up the foliage as needed.
- Invading Phlox (Phlox stolonifera)
- Simply clean the foliage once the spring blooms have passed since these have evergreen foliage.
- False indigo (Baptisia australis): Either leave the foliage for the seed heads, or cut it back completely as new growth starts to emerge in the spring by cutting back by a third in the fall.
- Lavender (Lavandula) (Lavandula)
- Since lavender is a woody perennial, they only need a small amount of shaping trimming in the late fall or early spring. Avoid forcing growth before a frost by not pruning back too early; you want the growth to be hardened off so the frost won’t destroy it.
- Before the chrysanthemum’s new foliage emerges in the spring, fully prune the plant. Mums benefit from having more leaves on top throughout the winter to shield the plant’s crown.
- Rogue Sage (Perovskia)
- Since Russian sage is a woody perennial, only a moderate pruning to shape them in the early spring is beneficial.
There are several exclusions to the guidelines, as there usually are with gardening:
- Pruning down in the fall, Bearded Iris Although the leaves will still be green, they must be removed since the iris borer’s larvae are found there.
- Decorative Grasses
- When ornamental grasses are left uncut after dying back, they produce stunning winter interest in the garden. If you must trim back in the fall, be sure to wait until they have fully died back. Make sure to prune in the early spring before new growth appears if you do so. For information on how to prune the various grass varieties, click here.
- RosesIf it has to be shaped, leave the rest and only chop down a third. Any severe pruning should be postponed until early spring, right before new growth emerges.
When pruning and cleaning up your garden in the winter, remember to always practice excellent garden sanitation. To try to contain and control the disease, make sure to remove all foliage from the garden and the ground if you know a plant is sick. In order to avoid unintentionally spreading any diseases, you should also routinely clean your pruners with rubbing alcohol or a bleach and water solution.
Although perennials need patience, the reward is definitely worth the effort!
How is Echinacea pruned for the winter?
- Before cutting down to the ground to get ready for fresh growth in the spring, let plants stand through the winter to provide food for wildlife.
Coneflowers are a must-grow if you appreciate watching pollinators buzz and flit about lovely, trouble-free flowers that bloom for a long time. Although purple coneflowers (Echinacea purpurea) are the most prevalent, there are many new coneflower cultivars available in a rainbow of cheery hues, including pink, yellow, orange, red, and white. These flowers don’t just provide joy for a short time; they return year after year because they are perennials.
Because of the “cone that starts to poke up in the center of the circle of petals as each flower matures, coneflowers get their name. Actually, this is a group of seed heads that, when allowed to dry on the plant, serve as Mother Nature’s bird feeder, luring a large number of cardinals, goldfinches, and other hungry birds.
How to Choose Coneflowers
Which of the dozens of different coneflower kinds should you grow? The quickest response is: whichever ones you deem attractive and have room for (check the plant tag for info on this). Want some recommendations? Use these
- There are numerous native coneflower species, but the purple coneflower, which typically reaches heights of 2 to 4 feet, is the most well-known.
- ‘White Swan’ is a well-known variety that grows up to 4 feet tall and has big white blossoms among other widely available types.
- A lot of dwarf coneflower types, like “Kim’s Knee High,” remain fairly compact (with pinkish-purple flowers). If you have a small garden, consider planting them because you will get many blossoms in a short amount of space.
- Coneflower variants are also available that hardly resemble coneflowers at all, notably hybrid double types with two rows of petals. Just be mindful that some of plants produce flowers that fade more quickly than others in the garden.
Where to Plant Coneflowers
Coneflowers should be planted in an area with at least 6 to 8 hours of sunlight per day. In warmer regions (zones 8 and higher), though, a little bit of afternoon shade is actually a good thing, as it will help keep the flowers from fading. As a result of their clump-forming nature, these plants won’t spread as widely as some other perennials. Many of the older varieties will self-seed if you leave blooms in placean easy way to get more plants!
When to Plant Coneflowers
Coneflowers grow best in the spring, after all threat of frost has passed. You can plant in the early fall as well. Just make sure your new plants have at least 6 weeks before the first anticipated frost to form roots; otherwise, they might not reappear in the spring.
How to Prepare the Soil for Planting Coneflowers
Coneflower roots need a healthy environment to flourish, so strengthen your natural in-ground soil by adding 3 inches of Miracle-Gro Garden Soil for Flowers to the top 6 inches of soil. The Moisture Control technology in this nutrient-rich garden soil helps to safeguard plants when they unintentionally receive too much or too little water. Additionally, if you use Miracle-Gro soil and plant food (and adhere to all instructions), you’ll get up to three times as many blossoms during the growing season (compared to unfed), so be sure to read the part below on “How to Feed Coneflowers.” Just one coneflower planted? Make a hole, then mix garden soil and the recently excavated earth 50:50.
How to Plant Coneflowers
1. Determine the location where you’ll plant your coneflowers, making sure to allow enough room between each plant. (The plant tag ought should indicate how much room you need.)
2. Create a hole for each plant that is identical in depth and width to the root ball.
3. To give root growth a boost for the first 30 days, drop a Miracle-Gro Quick Start Planting Tablet into the planting hole (as per the instructions on the label).
4. Remove a coneflower plant from its pot and insert it into the gap. The top of the root ball should be level with the surrounding soil.
5. Fill in the area surrounding the plant and firm up the dirt there.
6. Water sources.
7. Spread a 3-inch layer of mulch around the plant, being careful not to let it contact the stem, to help keep the soil moist and to block sunlight so weeds can’t develop.
How to Stake Coneflowers
Coneflowers rarely need to be staked because of their sturdy branches and large flowerheads. However, if you do encounter floppy plants, drive a strong stake close to the middle of the plant (avoid going through the plant), and then loosely wrap twine around the stake and the individual stems. Or, you might spend money on a spherical flower clumping stake. In either case, the finished product should appear natural, not constricted around the plant’s middle.
How to Water Coneflowers
Coneflowers can tolerate drought pretty well once they’ve had some time to establish themselves. Check on them every other day after planting; if the top inch of soil is dry, thoroughly water. Your coneflowers’ droopy leaves are another indication that they need water. Coneflowers shouldn’t require watering after a full growth season in the garden unless it hasn’t rained in at least two months.
How to Feed Coneflowers
Want a ton of lovely flowers? As soon as fresh leaves begin to grow in the spring, begin feeding your coneflowers Miracle-Gro Water Soluble Bloom Booster Plant Food. Your plants will grow bigger and produce more blooms as a result of this flower feast, which gets to work right away. Additionally, since you may apply water-soluble fertilizer when watering, it won’t require any extra time to do so.
How to Deadhead and Prune Coneflowers
Deadhead coneflowers frequently at the start of the bloom season to promote greater flowering by removing the faded blossoms before they set seed. Always prune back to a leaf or section of the stem where a new bud is visible. You can just leave them alone later in the season when the plant starts to produce fewer blooms.
To feed the birds over the winter, let the plants alone. Prune them to the ground in late winter. In the early spring, leaves will appear at ground level, soon to be followed by flower stalks.
Try this simple trimming tip to prolong the blooming period of your plants’ coneflowers by at least a season. Cut back some of the stems by half as they start to grow again in the spring to postpone flowering on those stalks. The cut stems will lend their beauty a bit later in the season after the uncut stems have finished blooming.
Can I Divide Coneflowers?
Coneflowers don’t require dividing like some perennials do in order to thrive. They are difficult to divide because each plant has a single taproot. Therefore, simply let them be.