Your succulent’s genus and species will define what kind of cutting you can take. For instance, cuttings or leaves can be used to reproduce the majority of delicate Sedums and some Echeverias. Nevertheless, I utilize leaves for each.
Simply twist a leaf off the stem gently to remove it for propagation. Make certain that the draw is clean and leaves nothing on the stem. In fact, it’s okay to remove a small portion of the stem as well.
Make sure you get all the way down to the stem because every time I’ve broken off a leaf before the stem, it has always died. As you take the leaf off, it helps to have a clear view of the leaf’s base.
It’s a really cheap method to begin a collection of new plants, plus it’s a lot of fun to grow succulents from seed to baby plant to plant!
How to take a cutting for propagation
On the other side, you’ll need sharp scissors or pruning shears to make a cut (I use these and adore them!). Just above a leaf on the stalk, cut off a bit of the succulent.
The succulent’s top can be removed, or you can remove a fresh branch. Both will function!
How are succulents propagated from leaves?
Taking an active, healthy leaf from a mature succulent plant and utilizing it to establish a new plant is known as “propagating with leaf cuttings.” Because the leaves of succulents with fleshy, plump leaves, like echeveria, are simple to snap off cleanly, this method of propagation works well with them.
While some leaves may simply pop off with a little tug, others could necessitate the use of a sharp knife. Take a healthy leaf from the plant’s base with clean hands or a sterile knife, making sure to remove the full, undamaged leaf.
After being removed, allow the leaf to recover for about four days in a warm, well-lit place so that the wound can callus over. When the leaf has calloused, prepare a fresh planter with soil, fill it with water, and set the callused leaf on top of the soil for multiplication.
When the earth is dry, spritz your leaves with a spray bottle. Keep them warm, in a room with lots of light, but out of direct sunlight. They must be kept warm and moist.
Little roots and leaves will start to emerge after around three weeks! A succulent may need a few months to grow large enough to be replanted (photos above are after about 8 weeks). When the leaf eventually gets brown and falls off, you’ll know it’s time. This indicates that the succulent no longer requires the leaf because it has consumed all of its nutrients.
Can a chopped succulent leaf be multiplied?
In the spring and summer, when leaves and stems are ready for active growth, it is simplest to propagate succulent leaves and cuttings. Most common succulents can be multiplied successfully from individual leaves or stem fragments.
- For succulents with fleshy leaves, like jade plants or echeveria and sempervivum rosettes, leaf propagation works well. The leaf must remain intact for the root to take. To loosen the leaf, gently bounce it back and forth while holding it between your forefinger and thumb. After that, carefully separate the leaf from the parent plant, keeping the base in tact.
- Succulents with distinct stems, including stacked crassulas and spreading or erect sedums, respond well to stem cuttings. Cutting succulents is analogous to propagating soft-stemmed plants. To cut stem tips, use a sharp knife, or take an entire stem to make many starts. Each cutting should be 2 to 3 inches long and have multiple leaves. Only the top two leaves should be kept.
Gather Your Succulents To Plant
For this video, we’ll be planting a variety of succulent species using both cuttings and discarded leaves. Amass the materials you want to plant. You can either utilize fallen leaves or cut cuttings from an established plant. If you can’t locate cuttings anywhere else, you can usually find them online and at most florists. Although these are also available on Amazon, I got mine from a vendor on Etsy.
Prepare your succulents for planting.
The most crucial step in this method is preparing your succulents. Make sure you have enough stem to plant in the ground so it can support the plant. Any excess leaves at the stem’s base should be removed. It’s good to leave approximately an inch of the stem exposed for larger cuttings, and you can use less for smaller cuttings.
After that, examine the base of your cutting. The plants ought to have a “callous” on them, which denotes that the plant’s base has dried out. You should wait a few days before planting freshly cut succulents because this forms a few days after the succulent is cut. By letting the cut end dry more quickly on a paper towel or paper bag, you can hasten this process.
Succulents are wonderful because you can also plant their leaves, so hold onto the ones you pulled off the stem. Verify your succulents for any bad components. Any area of the plant that is dark contains rot, which can spread to other areas and ultimately destroy the plant. Simply cutting it will allow you to get rid of the rotten parts.
Mix your soil.
If you aren’t using a pre-made succulent soil mix, you’ll need to prepare your soil so that it will drain effectively and support the growth of your succulent plants. To make the soil drain well, I combine one part potting soil with one part sand. In order to help larger plants become more firmly rooted in the ground, I also prefer to have a supply of tiny rocks nearby.
To fill a pot or tray, pour your soil mixture. I’m repurposing an old baking pan that I can’t bake in as a planting tray.
Plant!
We’ve reached the enjoyable part now! Make a little, inch-deep hole in the ground. After inserting your cutting, fill up the depression with soil.
Make careful to space your cuttings, if you’re planting more than one, roughly 2-3″ apart.
Ensure that your plants receive adequate water. Although succulents don’t often require much water, you may need to water them every 2-4 days while they are developing their roots, depending on how dry the soil becomes. It’s normal for the leaves to initially appear a little dried out because the plant is using its reserves of stored energy to develop new roots. New growth should begin to appear in around four weeks. Change to weekly watering or watering only when the soil is dry once the plants have set their roots and have started to grow.
Admire and Show Off Your Work!
Well done! Show off your incredible craftsmanship and green thumb to all of your friends! These plants will be prepared for repotting if you desire once they have developed roots and begun to grow, which should take around 3 to 6 weeks. They make wonderful Christmas gifts for friends and coworkers when planted in a tiny Mason jar or vibrant pot!
What is the time required to grow succulents from leaves?
- Leaf propagation: Typically, it takes 2 weeks for roots to develop through leaf propagation. New leaves will start to form in around 8 weeks and can optionally be transplanted to a tiny container.
- Root formation typically takes 4 weeks, but it can occasionally take longer with stem proliferation.
- Offset propagation: Once the pups have developed a calloused skin, the roots typically begin to grow after 4 to 10 weeks.
- The process of propagating seeds takes the longest—cactus seeds can take anything from three weeks to a year to even begin to germinate. After that, the seedling takes a very long period to mature into a full-grown adult.
Succulent leaves can they grow in water?
In water, most succulents can be multiplied. If you have a succulent that is stretched out, you can take stem cuttings and root those, or you can create roots from healthy single leaves.
The most successful succulents are those with thick, meaty leaves, like the Echeveria plant. So when you first try your hand at succulent propagation, these are an excellent option.
It makes sense to multiply a few leaves at once. By doing this, you increase the likelihood that there will be survivors. While others may decay or just wilt and wither away, certain succulent leaves will only produce roots and no new plant.
How quickly can you propagate succulents?
So, you may be wondering how to quickly propagate succulents. I can relate to both the joy and frustration of watching a new plant develop.
Since I’ve been growing succulents for a few years, allow me to give you some advice on how to quickly propagate your succulents as well as some alternative techniques you can try.
Stem cuttings are the simplest and quickest method of propagating succulents. If the plant is a fresh cutting from the mother plant, it will already have a strong foundation from which to build its new root system. Another instance is when you cut off the succulent’s top portion because it has been stretched out significantly (etiolation), this stem will likewise give rise to numerous new plantlings (pups). Due to its existing root system, the plant will also have a great possibility of producing more offset and growing quickly.
Always check that the stem cuttings are a respectable size for the plant’s typical size.
According to my experience, I always want to make sure that the succulent has a lot of nodes where the leaves attach to the stem and a lot of leaves in its stem. Once the succulent is put in soil, these stem nodes will form roots, and the leaves will serve as the succulent’s water source until its root system matures.
When do I plant succulent leaves in the ground?
The majority of succulents require several months to reach “normal size,” but some can take up to a year. In other words, while this technique isn’t particularly quick, it is effective.
Put soil over the roots as soon as you notice them. They’ll stay cool and have access to water in this way. Continue watering to keep the soil moist.
With the mother leaf, nothing needs to be done. The mother leaf will start to wither and die as the baby succulent grows. The mother leaf will naturally fall off and split from the baby leaf in this situation, which is completely normal.
When this occurs, keep giving the young succulent plenty of water. After that, you can transfer it to another pot or put it in a different arrangement after it has a strong root system and is developing on its own.
Here, you can see how I plant my offspring from propagation:
Although they are technically capable of being repotted at any time, I advise waiting until the newborn is at least an inch in diameter. The newborn should have a strong root system as well.
Make sure to provide adequate water for the baby to continue growing once it has moved into its new habitat.
What succulent is the most straightforward to grow?
Having a collection of succulents might be most gratifying when you propagate them. You can increase the number of a popular plant in your yard through propagation, swap plants with friends, and even preserve a dying plant. Here are our top ten picks for beginner-friendly succulents.
Sedum rubrotinctum (Pork and Beans or Jelly Beans)
Bright crimson in direct sunlight; green in shadow. This resilient Sedum quickly fills in container gardens and rock gardens. Remove the leaves and place yourself on a damp, well-draining surface.
Echeveria ‘Lola’
one of the most productive Echeveria leaf plants. Both newcomers and seasoned collectors adore the flawlessly round rosette and the pearly pink leaves. They germinate swiftly and successfully spread through leaves in large numbers.
Sedum nussbaumerianum
difficult in dry, warm areas with little water. Easy to grow from leaf or tip cuttings. Before planting in soil, wait for a scab to develop (this takes about a week). This species’ colors and leaf shapes vary widely.
Sempervivum arachnoideum (Cobweb Houseleek)
Fast growing and produces more offsets than you’ll ever need! Plant cuttings directly in damp soil after cutting propagation, and you’ll observe roots forming in approximately a week.
Graptopetalum paraguayense (Ghost Plant)
A stunning hanging rosette succulent that may change color depending on the environment to orange, bronze, pink, and purple. It is quite simple to spread by leaves; you might even notice one growing on its own.
Echeveria colorata
Initially slow, but well worth the wait. Echeveria colorata starts out by producing lovely leaf sprouts with scarlet tips. Before removing the mother leaf from the new plant, wait until it has totally died.
Echeveria lilacina (Ghost Echeveria)
We frequently see the succulent Echeveria lilacina multiplying by itself. By planting leaves gently in soil with their roots down and leaf up, you can prevent the fast curling that occurs with leaves.
Can cuttings be planted directly in the ground?
As long as you have properly prepared the cuttings, you can place them directly into the soil. According to Chick-Seward, “cut under a node at the bottom and above a node at the top.”
Remember that the soil must be able to drain well; as a result, if your garden soil is heavy clay, for instance, you will need to make a suitable potting mix. Fill tiny pots with one part compost to two parts grit with compost, advises Raven.