Collect the ingredients for your soil mix. (Sometimes I combine them ahead of time, and other times I do it in the pot as I go.)
Remove the plants from their pots and loosen them. I used a dull knife on one plant and lightly pressed on the grow container on the other. In the video, both methods are clearly demonstrated.
Measure how much soil mix you’ll need to raise the top of the root ball to 1/2 to 1 below the top of the new pot once the plant is out of the pot. Incorporate the mixture.
When can I transplant my snake plant?
Late winter or early spring is the best time to repot your houseplant. Because your plant is dormant for the winter and it’s right before the active growing season, this is the optimum time to do it (Spring).
Although now is the best time of year to repot indoor plants, you can do so at any time. When the tops of the roots are swirling or coming out of the bottom of the container, it’s time to repot. When watering your plant, if water drains straight through the drainage holes, it’s a solid sign that it needs to be repotted. This indicates that your snake plant’s roots have been entangled.
If you’re not sure if your plant is root bound, wiggle the root ball out of the container and notice how difficult it is to remove, as well as the tightness with which the roots are twisted. When removing the roots from their plastic pot, be careful not to damage them. If one of these applies to your snake plant, it’s time to repot it.
How to tell if your snake plant is healthy
A healthy snake plant should be predominantly dark green in color, depending on the variety. If you observe the leaves turning pale or a light shade of green, it’s an indication that it’s in need of some extra TLC and is feeling under the weather.
Soil for Snake Plants
Snake plants are often straightforward to care for in all aspects, including the potting mix in which they’re placed.
While these plants aren’t fussy about their compost, keep in mind that they are prone to root rot, so heavier soil mixtures that stay moist for lengthy periods of time aren’t recommended.
To be on the safe side, use a soilless potting mix. These are lighter and more aerated, allowing for significantly improved drainage. Potting soil for cactus and succulents also works nicely.
Don’t worry if you can’t find a soilless potting mix. You can help increase compost drainage in a number of ways.
- Before planting, add a layer of stones to the pot’s base to allow excess water to drain freely.
- Plant in a porous material like terracotta to allow for more water to escape.
- Perlite or pumice, or something similar, can be added to the potting mix to assist aerate the soil.
Repotting Snake Plants
Snake plants, believe it or not, prefer to be kept in a container. As a result, you won’t have to repot your plant as frequently. Repotting should be done every 2-5 years as a general rule, however it can be allowed even longer depending on the plant.
Snake plants produce rhizomes, which are underground roots that allow the plant to propagate in the wild. Snake plant pots are frequently deformed due to their rhizomes roots, and some have even been known to burst straight out of them!
- Choose a pot that is slightly larger than your plant’s existing container; nevertheless, don’t go too huge. It should be enough to make it a couple of inches bigger.
- Fill the new container with compost around the edges and place the root ball of your plant inside. Make sure the top soil level on the plant is the same all the way around; planting too shallow or too deeply will harm your plant.
Watering Snake Plants
Although snake plants are practically resilient, watering is one thing that must be done correctly. Wait until the soil feels dry before watering the plant again, and never leave excess water standing. When watering, avoid getting water on the foliage and simply water the base of the plant.
Snake plants are drought resilient, and we’ve discovered that they thrive when left alone. Overwatering is one of the most common causes of plant death, so stick to your watering schedule and your plant will be happy and healthy.
If your snake plant has been overwatered and the soil isn’t drying out, consider repotting it into some fresh compost. This absorbs excess moisture, giving your plant time to recoup and recover from root rot.
Snake Plant Light
Snake plants are adaptable and may thrive in both high and low light environments. They will, however, perform best in bright indirect sunshine.
Variegated plants (such as sansevieria trifasciata) lose their bright color and patterns in low light circumstances, hence darker leafed types are the most resistant.
Make sure you’re not in direct sunlight. This can cause leaf scorching and burns.
Snake Plant Feeding and Fertilising
Feeding and fertilizing snake plants isn’t required, but it may provide them with a much-needed boost throughout the growing season.
To give your plant a good dosage of nutrients that passes through the soil slowly, try adding a fresh layer of compost to the container.
Any organic indoor plant feed will suffice if you wish to add some liquid feed or fertilizer. Simply follow the instructions on the feed packet and add during the spring and summer months.
Feeding plants that have been in the same pot for a few years is beneficial since it restores any nutrients lost in the potting soil due to watering.
Feeding late in the year and during the autumn and winter months is not recommended. This is your plant’s time to rest, and feeding it will make it grow faster.
How to Propagate Snake Plants
Snake plant propagation is simple! You will never need to purchase another once you have one.
- Separating the rhizomes is more typical with outdoor snake plants, although you might find some smaller plants sprouting from the base of your indoor snake plants. These are rhizomes, which are roots that sprout a new plant from the mother plant. If one of these appears, it can be detached and replanted in a different container.
- Take leaf cuttings and cut roughly 2-3 inches off the top of one of the leaves, then plant about 1 inch deep into soil (facing the way it should be growing) and it should establish roots in no time. And there you have it: simple propagation!
Propagation of indoor plants can be done at any time of year, but the best results are achieved in the spring. Because spring marks the beginning of the growing season, your plant will be able to devote as much energy as possible to developing new roots.
Humidity and Temperature for Snake Plants
Snake plants once again demonstrate their flexibility. They will be content in most rooms of the house and are unconcerned by the dryer air found in offices and residences. If your home’s air is unusually dry, spray your plant every now and again.
Snake plants aren’t particularly sensitive to temperature, so they can be kept in almost any room of the house.
Snake Plant Pests
Snake plants are pest-resistant, however mealy bugs and spider mites can be a problem. If any appear on the foliage, gently wipe them away with a little soap and water mixture. Continue doing so until your plant is free of pests.
Another approach to keep pests at bay is to spray the compost with a mixture of neem oil and water. This is an excellent and natural technique to keep all indoor plants free of pests.
Send a snake plant as a gift
Snake plants are considered good luck in several parts of the world, making them the ideal good luck present for someone special.
Overall, snake plants are low-maintenance and rewarding to maintain. They have a gorgeous appearance in the home and are so low-maintenance that they may thrive practically anyplace. We think they’re ideal for a plant rookie (or plant killer), and as long as you don’t overwater them with the watering can, your snake plant will thrive for a long time.
We adore our snake plant and believe it is ideal for bringing bold flare into the home. They’re also a winner in anyone’s book because they’re so easy to care for. You will not be disappointed if you order one from our website today!
Can you plant two snake plants together?
Yes, two snake plants can coexist in the same pot or container. Snake plants of various types, such as variegated and non-variegated, can be planted together. In every room, this combination makes a stunning and intriguing statement.
You’ll need:
Bantel’s Sensation Sansevieria is what I’m using. It has two puppies attached, as you can see. There are a variety of instances and reasons to divide your plant now. You should wait until they are about 4-6 inches tall. I decided against waiting (mainly because I was putting the “you should wait” notion to the test). It’s all your decision! I’ve done it about ten times already and have a 90% success rate. In a moment, we’ll talk about the ten percent.
Dividing:
- Cut the rhizome just about in the center with your sharp, clean blade. Make sure you have some of the rhizome and at least 2-3 roots left. You should wait if there are no roots.
- Put your young one in some fresh potting soil and water it (which should last a while).
That concludes our discussion. You’re finished! It’s possible that you were told to leave the pup out of the soil for a few days to allow the rhizome to callus over before planting it. Here’s when my ten percent comes in handy. My Bantel’s Sensation had two pups, as you can see in the photo. I planted one in the ground right away and left the other to callus over. Within days, that one had shriveled up and perished. Now, this could very well be because I chopped it too short (size and age). But since then, I’ve placed all of my pups on dirt and have had no issues.
You can see how this pup is doing if you go to my Instagram and search for the purple pot.
His color is fantastic, and you can see the lovely white stripes that make Bantel’s Sensation Sansevieria so appealing.
He’s still small because Sansevierias grow slowly, but his roots are developing strong!
Do you have any inquiries?
Leave a remark; I’d love to hear from you!
You might also be interested in How To Root Plant Cuttings In Water if you loved how simple this was.
Thank you for stopping by!
Should I water my snake plant after repotting?
The snake plant should be placed in the new pot at the same depth as before, with the top of the root ball 1 to 2 inches below the container rim. Remove or add dirt beneath the root ball until it is at the right depth after placing the plant in the prepared pot. Once the plant is properly positioned in the pot, put more soil around the roots. After repotting, water thoroughly to settle the soil around the roots and keep the potting media equally moist.
Do snake plants like small pots?
Is it true that Snake Plants like small pots? They do, in fact. Taller species and variations require larger pots as they mature. Smaller pots work well for the slower-growing kinds.
How do you transplant a baby snake plant?
Fill your new pots with ProMix Cactus soil, leaving an inch of space at the top. Repot the main plant into its previous container or the new container you’ve chosen. To avoid rot, don’t pile soil too high on the leaves and attempt to mimic the former soil level. Gently press the soil down around the plant to keep it in place. If it begins to lean, prop it up with a bamboo stake until the roots recover.
Do snake plants like to be crowded?
A root-bound plant is responsible for several of them. Snake plants don’t mind being crowded in a pot, but they do need to be repotted at some point.
Even if they haven’t outgrown their container, the soil quality deteriorates over time, necessitating a top-up.
Fortunately, repotting your snake plant is a simple procedure. A new pot, some homemade potting mix, and 15 minutes of free time are all you’ll need.
Can snake plants be in direct sunlight?
Snake plants have a lot of variety, especially when it comes to light requirements. These hardy plants flourish in a wide range of light conditions, from low to high. They usually grow faster in greater light, but direct sunshine burns leaves, especially when they’re outside. Indoors, roughly 10 feet away from a west or south window is optimal. When purchasing snake plants, pay attention to the pot label. Some species, particularly variegated kinds, require a specific light level to maintain their brightest leaf color.
What kind of pots do snake plants like?
- Select a container with a drainage hole in the bottom. Snake plants thrive in terra cotta pots, which allow the soil to dry out more quickly than plastic pots.
- Use a potting mix that drains effectively. It’s best to use a potting mix made for “cacti and succulents,” as it’ll be less likely to become waterlogged.
- Don’t bury snake plants too deeply while repotting them. The plant should be placed at the same depth as it was in its previous container.
Choosing a Location in the Home
- Snake plants love bright, indirect light, but they may handle some direct sunshine as well. They do, however, grow nicely in shady corners and other low-light regions of the house (albeit more slowly).
- Avoid transferring your plant from a low-light area to direct sunshine too rapidly, since this may cause it to shock. When moving plants from a darker to a lighter place, do so gradually over a week or so, gradually exposing them to brighter and brighter light. Also, alter your watering practices accordingly; plants in warmer, brighter places will require more water.
- Maintain a warm environment for the plant, with temperatures over 50°F (10°C). In the winter, make sure the windows aren’t drafty.