As I indicated earlier, many growers like to cultivate a traditional tree shape, complete with a distinct canopy and trunk. However, F. lyrata tends to grow in a columnar or bushy shape when kept as a houseplant.
In the wild, F. lyrata does this on its own by losing its lower leaves and growing into its original shape as a banyan tree.
like the renowned “Wild F. lyrata and ordinary banyan, F. benghalensis, both start out their lives as epiphytes. When a seed falls into another tree’s canopy, it germinates, develops, and eventually strangles its host plant as it descends to the ground.
Your houseplant won’t do this, of course, but the tree shape is attractive. How can a rambunctious F. lyrata be transformed into a tall, graceful specimen?
First off, if you’ve recently acquired a highly sought-after fiddle-leaf, hold off on starting to prune it into a tree shape.
Whatever two-thirds of the intended height means to you within the boundaries of your space, let it grow to that point. The trunk might become strong and thick as a result.
It’s advisable to top the tree out at least eight to ten inches away from the ceiling if you want it to grow tall.
This not only improves the appearance but also prevents the top leaves from bending and slamming against your ceiling.
Say, for instance, that you want to top your tree off at about seven or eight feet and that your home has nine-foot ceilings. You shouldn’t begin trimming for lateral growth until the trunk is at least five feet tall based on these measurements.
Wait until spring or summer when the plant is actively growing before pruning your fiddle-leaf fig to generate a tree form with branching lateral growth. Then, make a cut at least six inches down from the tip of the tree.
You can preserve and grow this cutting! Cut in an internodal space, if possible.
Don’t remove the leaves that are below the cut. So that the plant can photosynthesize and generate energy to grow those lateral branches, you want them to stay.
Within a few weeks, your F. lyrata will start to branch from the cut. Although this tree occasionally produces just one branch, it frequently produces two or three additional lateral branches.
You can remove one or two leaves from the tree’s base once the new branches have developed leaves.
The hue of the leaves and emerging branches will deepen as the canopy ages. Feel free to remove one or two more leaves from the bottom part of the trunk once you become aware of this.
You can continue to prune leaves away from the tree’s trunk as the canopy grows over time. You’ll eventually grow a tidy trunk that supports a Y-shaped canopy.
Note: Some knowledgeable gardeners enjoy using a technique called “creating lateral branches by notching. Using this technique, the gardener carefully cuts through two nodes. This cut is supposed to encourage the tree to generate lateral branches without losing height.
Because of the fast growth of F. lyrata and the fact that we are confident that pruning for lateral branch growth yields reliable results, we advise using this technique to produce that attractive canopy.
After pruning, give your plant the best care possible by providing it with the right amount of water, fertilizer, and light, which will hasten the healing of its wounds.
Should a fiddle leaf fig be pruned?
Our indoor plants also require occasional trimming, just like when we clip our hair or groom our dogs. This not only generally enhances their beauty but also benefits the health of the plant as a whole. Among the advantages of trimming your fiddle may be:
Space: Fiddle leaf figs have a propensity to grow rapidly under ideal conditions, so you could realize that your fiddle is getting “packed.” Your plant will benefit from improved ventilation if you prune a few leaves and branches.
Sickness: Prune any leaves that are showing indications of illness, such as brown spots, right away. In addition to using a lot of energy to repair these damaged spots, your plant may also swiftly transmit the infection to other neighboring leaves and across the entire plant.
Form: Pruning your tree will help you get the picture-perfect appearance you’ve been wishing for, whether you have uneven growth or you just want to improve its shape.
Can I chop my fig tree’s top off?
Yes, you can overprune a fig tree, but since they are extremely hardy, as long as you do it during the dormant season, they shouldn’t suffer too much. To maintain the tree healthy, don’t prune more than 25% of the tree overall in a single year.
A tree will produce fewer figs the following year if too much of this year’s growth is removed since figs develop on this year’s growth.
What happens when a fiddle leaf fig is notched?
A room is brightened by a bushy fiddle leaf fig with lush foliage, but occasionally they might become leggy, malformed, or not have the full foliage you want. Making sure a fiddle leaf fig plant is healthy and receiving everything it needs to thrive is the first step in encouraging it to grow bushy leaves.
Before attempting to coerce the plant into producing bushy foliage, be sure you are providing for its growing requirements and that the plant is healthy. Here is a quick list of the requirements for your fiddle leaf fig plant to thrive inside.
Check on its light needs
For photosynthesizing to take place and generate the energy required for growth, your fiddle leaf fig needs direct sunshine. Place your fiddle leaf fig in an area that gets at least 6 hours of direct sunlight per day to make sure its lighting needs are being satisfied. It works great to be near a window in the west or south. An eastern window also works nicely if you have adequate eastern exposure.
The level of light your fiddle leaf fig plant needs to thrive is not present in the light coming from a northern window. Similar to this, watch out that your plant doesn’t get too much light, since a sunburned fiddle leaf fig won’t look its best.
Make sure it’s getting enough water
Your fiddle leaf fig requires enough water to stay healthy and beautiful. Every time the soil feels dry to the touch 2 to 3 inches below the surface, water it thoroughly so that water runs through the bottom of the pot. After watering your plant, empty the saucer or catchpan. A fiddle leaf fig that has been overwatered may develop root rot, among a number of other problems. Water that is left in the saucer may siphon into the soil and keep it moist.
When determining how frequently to water a fiddle leaf fig, keep a close eye on the soil around the plant and create a schedule that works for you. When it is vigorously developing in the spring and summer, it can need watering once a week or more. During the fall and winter, it may last 10 days or longer without needing water.
Put your fiddle leaf fig in the right soil
To maintain the health of your fiddle leaf fig, you need well-draining soil. The roots may become trapped in squishy soil as a result of poor soil drainage. This may result in diseases like root rot.
By mixing one to two parts all-purpose potting soil, one part perlite, and one part peat moss, you can create your own potting soil for your fiddle leaf fig tree. Widely regarded as the ideal soil for fiddle leaf figs, this produces a light soil that drains well.
Ensure it has the right temperature and humidity
Temperature changes will harm your fiddle leaf fig, which enjoys temperatures between 65 and 75 degrees. It should not be planted close to heating or air conditioning vents because it is susceptible to both hot and cold gusts. It prefers a relative humidity of between 30 and 65 percent, therefore dry air in your home during the winter months may be problematic.
Use water-filled pebble trays underneath the pot or set up a humidifier to maintain the happiness of your fiddle leaf fig tree. You might arrange your plants in a cluster to take use of the moisture they transpire. The surrounding humidity will increase as a result.
Some people prefer to spritz their plants frequently, but this method is ineffective for increasing the humidity in the area around your plants. Misting has short-lived effects and needs to be done frequently during the day to be effective.
Feed your fiddle leaf fig with its preferred fertilizer
High nitrogen fertilizers work best for fiddle leaf figs. The optimal formula is 3-1-2. This or a similar recipe can be purchased from a hardware store or garden shop. From spring through summer, feed your fiddle leaf fig once a month, adhering to the application rate on the container. When new growth starts to show in the spring, you should restart fertilizing your fiddle leaf fig.
Pinch your fiddle leaf fig
The simplest and least labor-intensive technique to spur new growth is to pinch.
The act of pinching a fiddle leaf fig involves using your thumb and finger to scrape off the tiniest fresh leaves from the tops of your plant’s branches and stem. Squeeze the fresh leaves to remove them from the plant by locating them.
The plant must create new growth from nodes along the stem or branch when the fresh leaves are pinched out.
Prune your plant
While pruning requires a bit more work than pinching does in terms of making your fiddle leaf fig bushier, the consequences are the same.
You will require a clean, sharp pair of clippers or a knife to prune your fiddle leaf fig. Find a node on the plant’s stem where you want new growth or lateral branches to develop.
Just 1/4 to 1/2 inch above the node, cut the stem. This will compel the plant node to produce new growth. To force branching, you can prune lateral branches or the fiddle leaf fig’s entire top.
No more than 10% of the plant should be pruned. Extreme trimming may stress the plant and retard its growth.
Notch your fiddle leaf fig
A more sophisticated technique for making your fiddle leaf fig tree bushy is notching.
As previously mentioned, notching entails slicing the plant’s stem right above a node. This prevents the release of growth hormones and causes the node to produce new growth.
Since notching necessitates a deep cut through one-third of the stem, it carries a small chance of accidently cutting the entire stem. If you want to force new branches and bushy development on your fiddle leaf fig tree, try notching it as described above.
Your fiddle leaf fig plant will look better if you promote lush new growth. Notching is one method of doing it, but it’s not the only one. If you’re worried about notching your fiddle leaf fig and running the danger of breaking it or totally cutting the stem, think about pinching or pruning to create a bushy plant as an alternative.
Why should I Wiggle my Fiddle leaf fig?
Your indoor tree’s trunk can be moved to simulate wind, which will help you become more resilient outside. You can also leave your tree outside for extended periods of time to strengthen its trunk and expose it to the elements. Once you get the leaves inside, be sure to inspect them for bugs.
What are the best growing conditions for an indoor fiddle leaf fig tree?
Know that your fiddle leaf fig tree prefers moderate temperature changes and place it in a sunny spot within the house. The tree should be planted in a container with well-draining soil that is kept humid but not soggy since this might cause root rot.
Why isn’t my fiddle leaf fig tree flowering?
You should be careful not to overwater your fiddle leaf fig because it is prone to root rot. When storing the fig within a container, make sure the bottom has lots of holes to allow for proper drainage.
How do I fix a leggy fiddle leaf fig tree?
Give a leggy or tilted fiddle leaf fig tree bright, filtered sunshine as treatment. Please place your plant in the area of the house that gets the most indirect sunlight, which is usually six to eight hours per day. Don’t keep it in the Sun for too long, though; doing so could scorch the leaves.
Will wiggling my fiddle leaf fig tree weaken its roots?
Every one to two weeks, wiggle your fiddle leaf fig tree for 1.5 to 2 minutes to significantly thicken the trunk. Beginning with light shaking, progressively build up the force. If your plant is stake-supported, move it about at first with the support in place. You can take the stake out once your fig tree has gotten used to this practice.
My fiddle leaf fig is leggy; why?
Leggy or unstable growth on a fiddle-leaf fig (Ficus lyrata) typically indicates insufficient light. The entire plant could develop a weak trunk and grow tall and flimsy. Long branches may have leaves that are widely spread apart, or this may just apply to the lower branches if they are shaded from sunlight. Lower leaves may fall off if they don’t get enough light.
The brightest room in your home should have your fiddle-leaf fig tree, which should be placed just far enough from the window to avoid direct sunlight touching it. The plant will also receive the necessary protection if there is a sheer drape between the window and it. Position carefully so that all branches, high and low, have access to light, and move anything in their way. If your windows are high and light doesn’t reach the bottom leaves, you might need to keep your plant on a stand. Every time you water, rotate the tree a quarter turn to ensure that all sides receive an equal amount of light and that its shape remains balanced.
Keep leaves clear of dust, as an accumulation will limit the amount of light that reaches the leaf. In the spring, prune lanky branches to a node.
Our Guide contains more details on how to take care of your fiddle-leaf fig plant.
How should a fig tree be shaped and trimmed?
Whether you have a fig tree or a fig bush in your backyard garden, pruning it each year will promote growth. Think about some general advice for this procedure.
- 1. In the tree’s first year, prune it. When you first plant a young fig tree or fig shrub that you purchased from a nursery, trim it. When pruning for the first time, you should remove roughly 50% of the branches. This will enable the tree to concentrate its efforts on developing a solid root system.
- 2. During the tree’s first winter, prune it once more. Winter trimming should be done every year, beginning with the first winter your tree experiences. The end of the tree’s dormant season in late winter is the ideal time to use pruning shears. By early spring, new branches will begin to grow as a result.
- 3. Continue to prune your tree every year after that. It’s crucial to prune your fig tree in its first year, but remember to continue pruning it the following year and the year after that. Fresh fruit will start to ripen in early summer if your fig tree is pruned while it is dormant. This will result in a more fruitful growth season.
- 4. Decide which branches should bear fruit. It’s time to go strategic now that you’ve finished your first pruning. Search for five to six exceptionally sturdy branches that branch off from the main trunk as you prune the tree in its second year. Your main branches for fruit production will be these. Remove the rest of the tinier branches from the main trunk.