Your fiddle leaf fig probably has no other branches that will allow it to transition from a fiddle leaf shrub to a fiddle leaf tree. In addition, bear the following in mind before proceeding:
The amount of regrowth that results from pruning depends on how severe it was. The reason for this is that the plant is trying to grow again in an effort to balance the root system below with the shoot system above, which is now designed to support the plant at its bigger size before trimming.
Usually, the most active shoot growth takes place 6 to 8 inches after the pruning cut.
Make the cut on your fiddle leaf fig
Make a decision regarding the size of the Ficus lyrata cut. Once more, the branching will be more noticeable the longer a part is clipped. (And the less the plant will grow in height, at least for that shoot.)
Your fiddle leaf fig won’t be encouraged to generate as many lateral branches off of the main trunk if you simply pinch out the fresh buds at the top with your fingers.
If you want to encourage a little lateral development to make your plant appear fuller near the top, pinching is more helpful.
On the other hand, you’ll see a lot more branching if you remove 12 of the top shoots.
Choose the node that you want to cut above. The spots on stems known as nodes are where leaves, buds, or branches can grow. However, not every node has leaves or branches; some nodes may only have a mark and a little thickening of the stem. Internodes are the parts of the stem that lie between the nodes.
3. Make use of a clean pair of pruners. Just above the top of your node, make the cut. Cut just above the node rather than into it, which would harm it.
Any plant in the fig family, including your fiddle leaf fig, will exude an oozing, milky, white sap when cut. Simply avoid eating it, getting it in your eyes, or letting it land on the carpet because it can be annoying.
4. As a final piece of advice, wait to remove leaves from the trunk of your fiddle leaf until the new branches have begun to grow. Your plant should be as robust as possible because those leaves aid in the development of the new lateral buds.
(Are you wondering what to do with the plant pieces you pruned? Why not cultivate a second fiddle leaf fig?
I’m done now! Now, give your new lateral buds, which will eventually grow into branches, a few weeks. While the exact length of time varies on a number of variables, your chances of success are higher if you attempt this in the spring, when fiddle leaves are actively growing, as opposed to the winter, when they are largely dormant. In comparison to winter, when the plant will need more time to heal the cut and form new buds, springtime will see rapid new development.
How do you grow a Fiddle Leaf Fig that is bushy?
The quickest and safest approach to encourage your fiddle leaf fig to branch out is without a doubt pruning! It entails cutting your Fiddle Leaf Fig’s stem off at the height you want branches to emerge from. Remember that you may always propagate your Fiddle Leaf Fig and grow a brand-new plant from the clipped portion!
Pruning works by reawakening buds that are dormant beneath the incision. The growth hormone (auxin) is redirected to the buds that are typically closest to the cut because it can no longer move up the stem, which causes this to occur.
Usually, if you want your plant to branch, you want it to have at least a few branches, if not more. Pruning above a cluster of leaves will give you the highest chance of getting many branches. Or a cluster of closely spaced leaves.
Where the leaves and stem meet, dormant buds can be found. You should therefore aim for a region of your FLF that contains buds close together if you want to have the best chance of awakening several latent buds. Don’t panic if you can’t see them; sometimes they are tiny and difficult to see. They will be present!
The distance between the “nodes” is another item to watch out for. These locations can also produce buds. On your fiddle leaf fig, nodes—which resemble little rings around the stem—are frequently where the crunchy, browned leaf casings are located.
Within a week or two, you should start to notice buds getting bigger. Nevertheless, depending on the climate, it may take longer and even longer for the new leaves to bloom.
Since you’ll be removing a portion of stem, pruning is best done when the plant is taller than the height you’d like it to branch at. For instance, if you want your FLF to have branches that are around 3 feet high but it is 5 feet tall, you will need to prune the plant to make it only 3 feet tall.
See the section on notching if you don’t want to reduce the height of your plant.
Tips for Pruning:
- Use a set of cutters that are well-kept and razor-sharp.
- Make an angle cut in the stem.
- Remove any sap by using a fresh paper towel.
- Dormant buds (nodes) are located where a leaf meets the stem; therefore, you should prune just above a leaf. At this point, you might be able to notice a tiny brown (or occasionally green) bump.
What happens when a fiddle leaf fig is notched?
A room is brightened by a bushy fiddle leaf fig with lush foliage, but occasionally they might become leggy, malformed, or not have the full foliage you want. Making sure a fiddle leaf fig plant is healthy and receiving everything it needs to thrive is the first step in encouraging it to grow bushy leaves.
Before attempting to coerce the plant into producing bushy foliage, be sure you are providing for its growing requirements and that the plant is healthy. Here is a quick list of the requirements for your fiddle leaf fig plant to thrive inside.
Check on its light needs
For photosynthesizing to take place and generate the energy required for growth, your fiddle leaf fig needs direct sunshine. Place your fiddle leaf fig in an area that gets at least 6 hours of direct sunlight per day to make sure its lighting needs are being satisfied. It works great to be near a window in the west or south. An eastern window also works nicely if you have adequate eastern exposure.
The level of light your fiddle leaf fig plant needs to thrive is not present in the light coming from a northern window. Similar to this, watch out that your plant doesn’t get too much light, since a sunburned fiddle leaf fig won’t look its best.
Make sure it’s getting enough water
Your fiddle leaf fig requires enough water to stay healthy and beautiful. Every time the soil feels dry to the touch 2 to 3 inches below the surface, water it thoroughly so that water runs through the bottom of the pot. After watering your plant, empty the saucer or catchpan. A fiddle leaf fig that has been overwatered may develop root rot, among a number of other problems. Water that is left in the saucer may siphon into the soil and keep it moist.
When determining how frequently to water a fiddle leaf fig, keep a close eye on the soil around the plant and create a schedule that works for you. When it is vigorously developing in the spring and summer, it can need watering once a week or more. During the fall and winter, it may last 10 days or longer without needing water.
Put your fiddle leaf fig in the right soil
To maintain the health of your fiddle leaf fig, you need well-draining soil. The roots may become trapped in squishy soil as a result of poor soil drainage. This may result in diseases like root rot.
By mixing one to two parts all-purpose potting soil, one part perlite, and one part peat moss, you can create your own potting soil for your fiddle leaf fig tree. Widely regarded as the ideal soil for fiddle leaf figs, this produces a light soil that drains well.
Ensure it has the right temperature and humidity
Temperature changes will harm your fiddle leaf fig, which enjoys temperatures between 65 and 75 degrees. It should not be planted close to heating or air conditioning vents because it is susceptible to both hot and cold gusts. It prefers a relative humidity of between 30 and 65 percent, therefore dry air in your home during the winter months may be problematic.
Use water-filled pebble trays underneath the pot or set up a humidifier to maintain the happiness of your fiddle leaf fig tree. You might arrange your plants in a cluster to take use of the moisture they transpire. The surrounding humidity will increase as a result.
Some people prefer to spritz their plants frequently, but this method is ineffective for increasing the humidity in the area around your plants. Misting has short-lived effects and needs to be done frequently during the day to be effective.
Feed your fiddle leaf fig with its preferred fertilizer
High nitrogen fertilizers work best for fiddle leaf figs. The optimal formula is 3-1-2. This or a similar recipe can be purchased from a hardware store or garden shop. From spring through summer, feed your fiddle leaf fig once a month, adhering to the application rate on the container. When new growth starts to show in the spring, you should restart fertilizing your fiddle leaf fig.
Pinch your fiddle leaf fig
The simplest and least labor-intensive technique to spur new growth is to pinch.
The act of pinching a fiddle leaf fig involves using your thumb and finger to scrape off the tiniest fresh leaves from the tops of your plant’s branches and stem. Squeeze the fresh leaves to remove them from the plant by locating them.
The plant must create new growth from nodes along the stem or branch when the fresh leaves are pinched out.
Prune your plant
While pruning requires a bit more work than pinching does in terms of making your fiddle leaf fig bushier, the consequences are the same.
You will require a clean, sharp pair of clippers or a knife to prune your fiddle leaf fig. Find a node on the plant’s stem where you want new growth or lateral branches to develop.
Just 1/4 to 1/2 inch above the node, cut the stem. This will compel the plant node to produce new growth. To force branching, you can prune lateral branches or the fiddle leaf fig’s entire top.
No more than 10% of the plant should be pruned. Extreme trimming may stress the plant and retard its growth.
Notch your fiddle leaf fig
A more sophisticated technique for making your fiddle leaf fig tree bushy is notching.
As previously mentioned, notching entails slicing the plant’s stem right above a node. This prevents the release of growth hormones and causes the node to produce new growth.
Since notching necessitates a deep cut through one-third of the stem, it carries a small chance of accidently cutting the entire stem. If you want to force new branches and bushy development on your fiddle leaf fig tree, try notching it as described above.
Your fiddle leaf fig plant will look better if you promote lush new growth. Notching is one method of doing it, but it’s not the only one. If you’re worried about notching your fiddle leaf fig and running the danger of breaking it or totally cutting the stem, think about pinching or pruning to create a bushy plant as an alternative.
Finding the Right Spot for Your Tree
Ficus trees dislike being moved around a lot, therefore it’s important to pick the ideal location for them and keep them there. They are not ideal for placement outside if your winter temperatures fall below 10 degrees Celsius because they are frost-sensitive. Your ficus tree is better kept as a lush, tropical house plant if you don’t live in a tropical climate.
To avoid any misunderstandings, I will first say what they detest rather than what they like:
- Members of the ficus family are extremely susceptible to cold because of their tropical origin.
- They need a warm, protected environment; drafts from doorways, windows, etc. are not acceptable.
- Your plants may become stressed by temperature changes, so keep them away from radiators.
- Your plant may lose leaves if you move to a location with a different lighting intensity. Be calm; these will grow back. New leaves that have adjusted to the shift in light levels will emerge.
- Although they can endure bright shadow, your plant will grow best in bright, indirect sunshine.
- The best orientations are to the south or west.
A warm, draft-free, spacious, well-lit area that is also sufficiently removed from radiators so as not to immediately affect their temperature.
Watering and Fertilizing
Throughout the entire growing season, give your ficus tree regular waterings. Just remember to wait till the compost has dried up a little before watering it again.
Only during the warm months, fertilize every three weeks with a properly diluted home plant feed. New shoots and leaves will be encouraged by the additional nutrients.
Reduce the frequency of watering over the winter, when your ficus is dormant and will consume less water and no additional feed.
Light Preferences
These trees are a very delicate group. They are extremely light-sensitive in addition to being hypersensitive to temperature changes. I can’t even begin to count the number of anxious phone calls from ficus owners whose plants had lost their leaves. People frequently believe that their plant is dying, although this is never the case.
Leaf drop is a sign that all plants in the ficus family are under the same stress. Your ficus tree frequently loses its leaves when the seasons change or even when you move it slightly. Don’t worry, there’s no need to freak out; nature has it all under control. Your ficus will develop new leaves that have gotten used to the lighting conditions in its new environment. What a wonderful idea.
How can a fiddle leaf fig develop numerous branches?
Our first achievement is the tree you can see here. We cut back the lower leaves to reveal the primary trunk after the branches sprouted. Since then, we have had a 100% success record in producing several branches on three additional trees we chopped in similar manner.
The most crucial tip is to clip a Fiddle Leaf Fig stem lower, to the area that is most woody. Your fiddle leaf fig’s main stem or trunk needs to be at least 3 tall to accomplish this.
Since we don’t want to lop our lovely plants in half, the majority of us simply pinch off the very top tips or cut a tiny section of the branch off at the top. However, we must prune the Fiddle Leaf Fig at a distance of 18 or more inches from the top of the stem in order to reach the woody area in order for it to sprout several branches.
Buds develop significantly more slowly when a stem is cut at a lower, woody point than they do when the plant’s top, green portion is clipped. This prevents a bud that is growing extremely quickly from taking control and gives the chance for other buds to form at once.
As you can see, within a few weeks, this tree sprouted 6 new branches after we nearly cut our extremely tall Fiddle Leaf Fig in half at a particularly woody region.