African violets may be grown from leaves fairly readily. Even novice growers can easily grow more plants and increase their collection.
Step 1: Trim and remove the leaf. Take a new leaf off the plant you want to multiply. The ideal leaf to utilize is mature; nevertheless, avoid using an old, harsh leaf. Trim the leaf blade’s top with a razor or a sharp knife. Although this step is not required, it will speed up the growth of the leaf’s roots and plantlets once it has rooted and will prevent the leaf from expanding on its own.
2. Cut the leaf petiole.
View the image on the right. Cut the petiole (also known as the leaf stem) at a 45-degree angle with the cut side facing up, to a length of about 1/2. Cutting at an angle will promote the growth of additional roots and plantlets, and they will more likely show up in front of the rooted leaf as opposed to being tucked under or behind it.
Root the leaf cutting in step three.
View the image on the left. Your rooting medium should be poured into a tiny pot. This mixture ought to be extremely airy and permeable. One part Pro-Mix (a soil-free peat and perlite mix) and three parts coarse vermiculite make up our rooting mixture. Any combination, at the very least, is allowed (some growers use only vermiculite or mix with perlite). You should moisten the mixture (not too soggy, or the leaf will rot). Utilize a “swizzle stick” to create a small hole in the mixture. In this hole, insert the leaf petiole up to the base of the leaf blade (as shown), and compact the rooting mixture around it. If there is space, more than one leaf cutting may be rooted in a single pot. Put the pot in a transparent, covered container or plastic baggie after labeling it. After that, put this somewhere sunny and cool—avoid direct sunlight or places that are too hot as these could cause the leaf cutting to burn or decay.
Plantlets at 12 weeks in Stage 4. From the cut end of the rooted leaf’s petiole, one or more plantlets will start to form and rise above the dirt. The ones shown are ready to be divided and planted right away, but we often wait 4-5 months because that gives more plantlets time to develop from the cutting. Additionally, the plantlets will be slightly bigger, more manageable, and more likely to survive their transfer.
Separate the plantlets from the leaf cutting in step 5. View the image on the right. Plantlets can be detached from the “mother leaf” when they are big enough for you to handle them easily. Take the cutting out of its pot, grip a plantlet firmly, and carefully remove the plantlet away from the leaf cutting. If your rooting mixture is light and not too wet, you can probably do this without using a knife. If your plantlet is healthy, it will grow roots when it is potted, so don’t worry too much if it doesn’t have many (or even any).
Step 6: Get the plantlet’s pot ready. View the image on the left. Your typical soil mixture should be used to fill a small pot (2 or 2 1/4). Create a small hole using an old pencil that is deep enough to accommodate the plantlet that will be potted.
7. Plant the plantlet.
View the image on the right.
Place the plantlet carefully into the hole and firm the earth around it. Plantlets should be buried in the soil just deep enough to cover the entire naked central stem or “trunk,” but not so deeply that the tiny growing point in the middle of the plant is buried.
Eighth step: You’re done! Water the plant minimally and label it. You can immediately put larger plantlets among your other violets. Put the plantlet into a clear, covered container or plastic baggie if it is still very little and/or has few roots. This will provide it a little “terrarium-like environment and protect it as it grows. In a few weeks, remove it from this container.
Can an African violet be rooted in water?
You undoubtedly wish you could have a lot of African violets in your indoor garden if you love them as much as I do. The good news is that these gorgeous floral plants are simple to root.
African violets can be rooted in water using a leaf, which is the quickest and simplest method I’ve discovered. You can use a leaf from one of your own African violets or even one belonging to a friend.
1. Fill a wide-mouthed container with warm water close to the top. Make sure to tightly wrap a piece of plastic wrap around the surface.
2. Pinch a mature, yet yet young, African leaf. It should be in good condition—green, attractive, and undamaged. Leave at least an inch of the leaf stem intact when you remove the leaf from the plant’s base. Two inches are preferable. Make a straight, non-jagged cut.
Can an African violet be started from a cutting?
Leaf cuttings are a simple way to multiply African violets. Cut off a portion of a firm, healthy leaf using a sharp knife. Keep the petiole, or leaf stem, 1 to 112 inches from the leaf blade. Vermiculite and coarse sand mixed 50:50 with moisture should be placed in a pot. Each leaf cutting’s petiole should be inserted into the rooting medium at a 45-degree angle. Each leaf cutting’s petiole should be firmly encircled by the rooting medium.
Once all of the cuttings have been placed, moisten the rooting media and let it drain for a while. Next, put a transparent plastic bag over the clippings. Use tape or a rubber band to attach the plastic bag to the pot. The leaf cuttings’ water loss is significantly reduced by the contained habitat, which also keeps them from withering and dying before they have a chance to take root. Place the pot in a well-lit area. Normal root formation takes three to four weeks. In six to eight weeks, new plants typically sprout leaves.
At the base of each petiole, many plants typically emerge. Carefully pluck or cut apart the plants to separate them. Individualize plant care by potting each one into a container with a well-drained potting mix.
How long does it take for cuttings of African violets to germinate?
The most common technique of propagating African violets is via leaf cuttings since it is both simple and effective. This project should be completed in the spring. Take a healthy leaf and its stem from the plant’s base using a sterilized knife or pair of scissors. Reduce the stem to roughly 1-1.5 inches in length (2.5-3.8 cm.).
Consider dipping the stem’s tip into some rooting hormone. Put the cutting in a hole dug in potting soil that is one inch (2.5 cm) deep. Water the area surrounding it thoroughly with lukewarm water while pressing the soil firmly.
By covering the pot with a plastic bag and fastening it with a rubber band, you can give your cutting a little greenhouse atmosphere. Just be sure to occasionally let the cutting have some fresh air. Keep the soil in the pot just moist and place it somewhere sunny.
Usually, roots start to grow after 3 to 4 weeks. In 6 to 8 weeks, new, little plants typically develop leaves. At the base of the cutting, many plants ought to sprout. Carefully pluck or chop away the young, little plants to separate them. You will receive a brand-new plant from each of them.
How Long Does it Take a Cutting to Root?
It takes a cutting of an African violet 3–4 weeks to develop new roots. You’ll start to notice fresh leaves about three to four weeks later. Repotting should be done when there are 2 to 3 new leaves emerging. The duration of this treatment can range from two to six months.
How Do You Collect Seeds From African Violets?
You must manually pollinate African violet flowers in order to extract the seeds from an African violet. After about a month, if you are successful, a seed pod will appear. After giving the pod two months to mature, carefully pry apart the pod to extract the seeds.
Are African Violets Easy to Grow From Seeds?
African violets are typically started from cuttings, although they can also be started from seed with relative ease. About the same amount of time is required. The seeds will probably need to be ordered because they can be challenging to gather on your own.
Propagation Temperature
Are you unsure about the ideal temperature for your brand-new, small African violets? The fact that African violets thrive in typical domestic settings contributes to their ease of maintenance. Maintain the temperature of these new plants between 65 and 70 degrees Fahrenheit at night and between 70 and 80 degrees Fahrenheit during the day.
Although mature African violets may tolerate the rare dip or spike in temperature, they prefer the same conditions as developing African violets. Avoid allowing the temperature to rise over 85 degrees or fall below 60 degrees since these extremes might slow or kill budding African violet plants.
Which is preferable, repotting African violets in soil or water?
While growing African Violets in soil avoids the need to plant them in soil, growing them in water is far more enjoyable since you can watch the roots and tiny plants develop up close. It is quite acceptable to inspect the plant to see if the roots have developed every 5 minutes. Don’t give up, though; the first symptoms of growth may not appear for some time. Even if you think the bottom end of the leaf looks a little strange, as long as the leaf appears healthy, you are on the correct route (almost like it would be decomposing a little).
Simply submerge your leaf (including petiole) in water after cutting it. Choose the proper container because the leaf shouldn’t actually come into contact with the water.
Room temperature should be reached by the water. Most of the time, tap water is fine, but you might choose filtered water if you think your tap water is mineral-heavy. Unless it gets murky, you won’t actually need to change the water too often. Refill as necessary, and after a few weeks, change the water.
Put your cutting in a location with plenty of indirect light, but avoid too much direct sunlight.
Now, just wait and watch. Depending on the season and the leaf, you should start to notice the first hints of roots sprouting after a week or two. However, it may take longer; these may take their time, much as the propagation of a ZZ plant may take some time. Keep in mind that roots may grow as long as the leaf is strong and healthy.
First Root after Two Weeks
Our leaf developed its first root! The roots hadn’t yet appeared on the other two. A few days later, the second one began displaying roots. However, the third one took an additional two weeks (this was an ancient leaf).
The first two’s roots are developing nicely. The third one does appear quite mushy and brown in the photograph, but it will still produce roots (soon).
All three of them eventually developed roots, and they are all getting stronger every day! Daily new growth is apparent, making it a fascinating process to watch.
Months Later
About two months later, the first young plants began to emerge (in what seemed like an overnight thing). Things will start moving more quickly from this point on because the roots are good and solid.
Weeks More
There are a ton of perfectly grown young plants present after another three weeks or so. It’s interesting to note that the oldest leaf, which took the longest to form roots, also generated the most young plants.
You can either plant your water-propagated African violets in soil when they reach this size, or you can put them back in the water and wait a little while longer.
Separate the Baby Plant From Leaf
Gently detach the petiole of the old leaf from the newborn plant’s roots. You should be able to remove the old leaf with your fingers, but if you feel uneasy or worried that you could harm the new plant, you can also cut it off. Use only sterile tools, please.
Put the young plant in the ground. You can purchase soil specifically made for African violets, but regular potting soil is also acceptable.
Place the young plant in soil with care, covering any exposed roots with earth. Do not completely drench the soil in water.
We like to place the baby seedlings into a bag for a time as the final stage in plant propagation. In addition to retaining moisture, this will deter any possible pests. Your newborn plant may appear a little under the weather for the first few days, but it should quickly recover and resume growing.
Are African violets a suitable fit for epsom salt?
Since most plants don’t perform well with salt water, it may seem illogical to fertilize your African violets with epsom salts. In reality, epsom salts only contain tiny amounts of the trace minerals sulfur and magnesium, which promote flowering in plants. Epsom salts, when used once a month, can help your violets flourish and work well with your specific fertilizer for African violets.
In a watering can or pitcher, combine two tablespoons of epsom salts with one gallon of warm water. To dissolve the salts and blend them, swish or swirl the water.
Pour the mixture under the leaves of the African violet plant while holding the pot over the sink to wet the soil but leave the leaves dry. Before putting the pot back in its tray or ornamental container, let all of the extra epsom solution drain away.
- Fertilizing your African violets with epsom salts sounds a bit counterintuitive as most plants do not respond well to salt water.
- Epsom salts, when used once a month, can help your violets flourish and work well with your specific fertilizer for African violets.
To remove an African violet from a leaf, how do you do it?
Maria in New South Wales, who has a creative way to hit African Violets, brought along this suggestion. Take the Africa Violet leaf cutting as usual, then acquire a piece of paper towel that is about 5 centimeters broad. Place it into some shallow water after carefully rolling it around the base of the leaf. When the cutting develops roots, you simply pot it up as usual using the piece of paper towel as a wick to keep it moist.
Thank you, Maria, for the wonderful advice. I believe it would also apply to other plants, like Begonias and Coleus, that you grow from leaf cuttings.
Broadcast:
Published: