When the light is not directly overhead, bring back outdoor plants to the garden. Create a shallow depression large enough for spreading roots by working the soil until it is crumbly.
Place your plant carefully inside of it, then add a layer of soil about an inch thick to gently cover the roots. To secure, lightly tamp. After a day, give the plant’s surrounding soil a gentle misting of water.
Cutting
With the cutting method, all you have to do is cut off a portion of a leaf or a stem, let it dry, and in no time at all, you’ll have roots and shoots. To keep it completely dry is the trick.
These are two approaches:
Beheading
A plant that has become tall and spindly or whose lanky, bare limbs hang downward like a pendant can benefit from this treatment.
Simply trim off the plant’s head, leaving approximately an inch of stem still attached. Dry it, let it to develop roots, then plant.
A healthy beheaded plant’s remaining stem should produce new leaves in a tight cluster, strengthening and improving the plant’s appearance.
As said, plant heads and leaves used as cuttings need to dry out and develop roots before planting.
It’s easy, really! This is how:
When may I plant my succulents that I’ve propagated?
Succulents can also grow from solitary leaves. Succulent cultivars with fleshy, plump leaves that are simple to remove function well with this technique. Leaf propagation spares less of the “mother” plant and each leaf can create numerous little plants, even though it will take much longer to produce a full-sized plant. Getting a quality leaf cutting is crucial, much like with stem cuttings. Although they must separate from the plant at the base of the stem, leaves can be wiggled off of a plant. Kremblas advises caution, saying, “Be sure to reach all the way down to where the leaf joins the stem, as a broken leaf will not propagate.” And make sure to select a leaf that is firm, plump, and limp-free.
Leaf cuttings should be allowed to callus and need partial sun to grow, just like stem cuttings. Leaf cuttings should be placed on top of a thin layer of succulent potting soil (not buried), and they should be misted with water to keep them wet. The leaf cuttings will start to grow little “pup” plants in about three weeks. The mother leaves will start to wilt and drop off after eight weeks, at which point your pups are ready to be planted.
Can you put succulent cuttings directly into the ground?
Aeoniums can grow enormous and get “weary,” and the best course of action is to remove them and transplant some cuttings. Make sure the offcuts from pruning succulents like aeoniums are long enough to allow them to stand upright when replanted.
- Starting with the tips, trim the stem, leaving at least 15–20 centimeters of stem.
- After removing the parent plant, set the cuttings aside. These plants have relatively shallow roots, making it simple to pull them out of the ground.
- About 20 cm of a trench should be dug, into which the cuttings should be placed and then backfilled to support them.
- In the summer, the cuttings can be planted straight in the ground. For about a week, don’t water the cuttings to let the base dry up. Before planting them during the cooler months, let them sit out of the ground for a week.
- In roughly a month the cuttings will take root and the top of the cuttings will grow soon after.
Leaf cuttings can be used to multiply Pachyveria. By removing a lower leaf, you can tell if the plant will grow from leaf cuttings. It might be able to produce new plants if it comes off without damaging anything. The leaf won’t grow if it breaks, creating a “fleshy cut.”
- Prepare a tray with a combination of succulent and cactus.
- Starting at the base and working outward, carefully remove the leaves while holding the rosette by the stem. You may also plant this rosette as a cutting, so leave a few leaves on it.
- Make sure there is enough of airflow around the leaves as you arrange them on top of the soil. Make sure the dish-side up is towards the bud (where the leaf joined the stem), which should be left above the soil.
- The bud end will begin to develop a small rosette cluster in two to three weeks. As the roots will grow from this end, make sure to maintain it close to the ground.
- The buds can be removed from the tray and placed in a container or planted directly into the ground after they are big enough to pluck out (and have many leaves).
How can water from propagating succulents be transferred to the soil?
It is strongly advised to wait until the cutting has at least an inch-long root or the mother leaf has begun to dry up before leaving it to air-dry on a paper towel for approximately a day or two if you wish to transfer or transplant your succulents from water to soil. Remember that water roots are far more delicate than soil roots, so handle them carefully and acclimate them to soil gradually.
When the roots are completely dry, gently bury your succulent in unfertilized cactus soil and place it in a spot with only bright, indirect light. Giving your succulents direct sunlight at this time is not advised because they are still delicate.  
From this point on, it is advised to water your succulent on a regular basis. Every two weeks, a thorough soak would do.
Watch this video to learn about succulent water propagation:
Watch this little video to learn how to avoid four mistakes while cultivating succulents.
See some of the most frequently asked questions about propagating succulents and cacti in this little video.
How should a propagated plant be planted?
The simplest method for growing plants with stems at the base.
- Plant should be taken out of container.
- Use a knife or your fingers to cut the plant into smaller pieces.
- Verify the roots of each division.
- In appropriate containers, replant.
How should young succulents be treated?
If you’re unsure of what to do with succulent puppies, you have options. You may allow them to continue to grow on the mother if there is enough room, or you may remove and replant them individually. However, wait until they are the size of a quarter before removing.
Pups should be removed with a precise cut using clean, sharp pruners or scissors. Normally, I would advise using a soft touch, but after seeing films from the professionals, I don’t think that is necessary—just another example of how resilient succulent plants may be.
Which type of soil is best for succulents?
Succulent soil is the basis for a plant’s ability to thrive, whether you are planting succulents outside or indoors. Larger soil particles are necessary for succulents to have a well-draining soil that allows water to enter quickly and drain away from the roots without compacting the soil. Use a soil test kit to verify the ideal soil for succulents and adjust the soil to a pH range of 6.0 to 6.5 before planting.
- Succulents prefer well-draining soil and have short root systems.
- The ideal soil is one that is nutrient-rich, loose, and rocky.
- Use a potting mix designed specifically for succulents and cacti when planting in containers, and place the plant in a pot with drainage holes at the bottom.
- Succulent plants could die off if their soil is too alkaline.
- Add soil amendments to the existing soil to make it more suitable for succulents’ needs.
Take the Cutting
Choose a suitable location on your succulent to make the cut. Make a quick, even cut through the succulent’s stem with your pruning shears to separate a cutting. Make sure that there is around 1 inch of stem exposed on the cutting before planting. The bottom leaves of the cutting might need to be removed for this.
Let the Cutting Callous
It is not possible to immediately put the cutting in the ground after it has been taken. Allow the “damaged” stem of the cutting to callous over for 24 hours by setting the cutting aside in a dry place. The stem should be healed and not seem to be “wet” in any regions after 24 hours. It’s now time to plant the cutting.
Plant the Cutting
Put a succulent mix or well-draining soil in a small terracotta or plastic planter. Make a tiny hole in the middle of the soil, and after placing the succulent cutting’s stem there gently, firm the soil up around it. To prevent rot, make sure the cutting’s lowest leaf is perched just above the surrounding soil.
After planting, avoid watering the cutting. Give the newly planted succulent cutting two or three weeks in a spot with bright, indirect sun.
Begin Watering Once Roots Sprout
It’s crucial to hold off on watering a fresh succulent cutting until the roots have formed, unlike when propagating other plants. Since succulents don’t need much water to begin with, watering a cutting before it has roots might cause the cutting to decompose under the soil very rapidly. Succulent cuttings may go quite a while without water, so don’t worry!
After letting the cutting sit for two to three weeks, give the top of the cutting a gentle tug to test for roots. If there is any resistance, the cutting can now be watered because the roots have started to form. Once the cutting has grown roots, it might need to be watered more frequently than usual succulents until it becomes established. Make sure the top inch of the soil dries out between waterings to prevent overwatering.
Patience, Patience, Patience!
Be patient while you take care of your new plant because succulent cuttings grow slowly. But after a few months after planting, you should start to see fresh growth.
Growing succulent cuttings can be gradually put back into stronger lighting as they become older, eventually reaching the full sun conditions that most succulents enjoy. Remember that succulent cuttings are susceptible to death from excessive affection. Once the soil dries out, they simply require light watering because they thrive on neglect.
How frequently should I water cuttings of succulents?
Succulents may be multiplied, giving you more of what you love. In order to share succulents with friends or because your plants have grown lanky and unsightly, you may need to propagate succulents. Whatever your motivations, we have a tried-and-true method for propagating succulents successfully.
Easy Steps for Propagating a Succulent by Leaf Cutting
1. Cut the desired number of leaves off the stem of the succulent you want to multiply.
- Where the leaf meets the succulent stem, make a precise snap. Your propagation will go more quickly and easily as a result.
- For propagation, take many leaf cuttings (see #5).
2. Allow the succulent leaf’s broken end to callus over, mend, and/or dry out.
- While a week is a fantastic amount of time, you can get away with 2-3 days for small succulent leaves and 4-5 days for larger succulent leaves while you wait for the leaves to heal.
- The succulent leaves you want to multiply should be placed on a sunny window sill to dry. The sun’s rays expose the leaves, strengthening them with nutrients as well.
- When natural sunshine is unavailable, LED grow lights are a choice.
3. Succulent leaves can be placed directly on soil in a pot or on a tray of soil.
- You should touch the earth with the healed portion of the leaf you are propagating, but not bury it deeply. From there, the newly propagated succulent will grow, and in order to survive, it requires light and space to breathe.
- You could leave the leaf to grow out of soil, but it will take much more time to propagate.
4. Provide water and light to your succulent leaf cuttings for successful propagation.
- Depending on the temperature and humidity in your home, water succulent leaf cuttings anywhere between two and four times per week. But don’t overwater. While keeping the soil from drying out, soil should be moist but not to the point of having any standing water.
- It’s ideal to have direct, bright light. Too much direct sun can scorch your leaf cuttings.
5. Produce several leaves.
- You’ll probably experience some casualties when propagating succulents. You have a better chance of successfully growing succulents if you follow the procedures of propagation with numerous leaf cuttings.
- Place a number of leaf cuttings on a tray or large pot filled with potting soil that is lightweight. Here, you can immediately see which leaf cuttings will begin to develop roots and young succulents and are good candidates for propagation and which leaves will begin to shrivel and turn black, making them unsuitable.
6. Be patient and give your leaf cuttings enough time to grow roots, produce offspring, and reproduce.
- Please take note that leaf cuttings that produce babies but no roots are preferable to leaf cuttings that produce babies but no roots.
- You can sigh with relief when you notice that the young succulents or pups are growing. When the pups or babies appear, you can tell that they are able to produce their own food through photosynthesis as well as their own leaf systems. A leaf cutting that only grows roots may never give birth to offspring or may take a very long time to do so.
- You can always pinch or clip off the mother plant leaf once the babies/pups have formed.
7. Plant your just multiplied succulents in pots.
- Allow your babies or puppies to establish strong roots so that you can repot them into any container you want. If you propagated them in your chosen pot, let them there to continue growing.
- While propagated succulents are still in their adolescent years, keep providing them with indirect strong light. Direct sunlight will be too harsh.
- Give your new succulents a nice soak once every two weeks to water them. Don’t overwater once more. Just keep in mind that succulents store water in their leaves and stems, and that too much water around their roots will result in death by root rot.
- Remove the leaf from the mother plant that was used to propagate the plant, if you haven’t done so before. It has probably already started to shrivel up. The mother leaf remnants will ultimately dry out and fall off if you cut it close to the new plant.
*Special remark Some succulents, such as hoya and kalanchoe, cannot be propagated via leaf cuttings but can instead be done using alternative techniques, such as stem cutting. Later, we’ll talk about those.
Folks, that’s all she wrote! Your succulents that you propagated should be well on their way to developing into mature plants. Good fortune!