Put the plants in a bowl, sink, or other container face down and let them soak for 10 to 20 minutes. As sitting water can create rot and harm or kill the plant, always take care to gently shake any excess water off the base of the plants. We advise watering the plants in the morning and leaving them outside of their containers in a spot where they can dry in four hours or less. Never leave your air plant submerged in water for a long time. Additionally, you can water your plants by “dunking” them in water multiple times and then gently shaking off the extra.
You can put your plant in the dish for a longer soak for a few hours or even overnight if it is having trouble and appears “thirsty.” Wide open leaves indicate a healthy air plant, but closed and curled leaves indicate a dehydrated one! Never immerse a bloom or flower because doing so can make them decay.
Before watering the plants with tap water, let the water remain for a few hours to let any chemicals evaporate. Whenever feasible, it is ideal to use water from ponds, aquariums, or rain. Never use distilled or artificially softened water, however it’s fine to use bottled water and spring water.
Keep in mind that every plant species is unique and will necessitate a different watering routine than others. Your air plants will suffer if you ever place them in soil.
As you might have imagined, air is another crucial factor for your air plant. For the plants to survive and live a healthy existence, there must be a good flow of pure air. After watering, it’s critical that the plants receive adequate airflow to completely dry in 4 hours. While air plants can survive in containers, it is advised against displaying them in closed containers and to wait until they are entirely dry before re-planting them in a container that might limit air flow.
Plants that are too close to the A/C vents may dry up more quickly and need to be watered more frequently.
If you want to keep your air plants in a terrarium or globe, you’ll need to take them out so you can water them normally. Also, be sure to leave them outside until they have had enough time to completely dry out. Four hours usually suffice. You can mist the tillandsia occasionally while it’s in the terrarium or globe to add some humidity. You’ll want to spritz your plants fewer times as the globe gets smaller and more compact. You can give the terrarium a few mists from a water mister a few times each week if it is bigger and has greater air circulation. Just watch out that the plant doesn’t get over-mistified and that it dries off quickly while in the terrarium.
If you bought one of our incredible sea urchin kits, be careful to separate the air plant from the sea urchin before soaking. Wait several hours for the plant to thoroughly dry before removing it from the sea urchin. If you give the air plant back to the sea urchin while it’s still wet, the base will become coated and eventually rot, which will harm the plant. If you want to mildly mist while inside the sea urchin, go ahead!
How are air plants cared for?
Here are 5 easy guidelines to remember when taking care of tillandsia:
- 1) Give your air plant regular waterings. Your air plant will require routine watering.
- 2) Supply light to your air plant.
- 3) Allow your air plant to breathe.
- 4) Maintain a Pleasant Temperature for Your Air Plant.
- 5) Don’t harm your airplant by doing this.
How well do air plants fare in terrariums?
I recently visited the Edison & Ford Winter Estates in Ft. Myers, Florida, where I was given a tour of their residences, gardens, research facilities, and museum. Particularly all the rubber trees they investigated as potential sources for tire materials, the plant collections there are amazing.
I took advantage of the fact that Edison is most well-known for creating the light bulb by buying a tiny hanging planter in the shape of a lightbulb. An air plant is within, resting on sphagnum moss. I enjoy looking at it every day because it hangs above my kitchen window.
Tillandsia, or air plants, are fascinating members of the Bromeliad family. Since all bromeliads are epiphytes, they depend on another object for support. Because of this, plants in nature use their root systems to grow safely on rocks and trees. They obtain water and nutrients from the air and rain through their leaves as opposed to using their roots to draw them from the earth.
Only three things are necessary to maintain air plants healthy and content: sunlight, water, and air movement.
First, you need light—filtered light, not direct light—coming through a window facing south, east, or west. You can hang them outside in a tree or other safe place during the summer.
Second, appropriate irrigation is essential for growing Tillandsia. I prefer to mist mine once or twice a week to keep the sphagnum moss substrate damp while allowing the plant to somewhat dry out in between waterings. The leaves are too dry if they curl or roll. Place the plant in water overnight to resuscitate it, then shake off any extra water before putting it back on display.
Third, proper air flow promotes disease prevention and allows the plant to dry out a little between waterings.
Terrariums, which are transparent glass or plastic containers filled with miniature plants, are ideal for growing and displaying air plants. Unlike other terrariums, which are securely closed, my light-bulb-shaped container includes an entire side that is open to promote air flow.
- Home watching is possible for all sessions.
- It will be broadcast in the Peoria and Havana Extension offices on Tuesday at 1:30 PM.
- After the presentation, viewers can watch recorded films of these sessions.
Do I need to wet my air plant frequently?
I frequently receive queries concerning caring for air plants that are kept in glass globes because they have become so popular. To enjoy your plant in a glass enclosure for many years, follow these few instructions. If you’re seeking for glass globes, our shop has a wide variety of unusual patterns.
- The more attention you can provide your plant, the bigger the globe.
- When you initially get your plant, give it a 20 to 30-minute bath. Keep an eye on the size and color to determine how content the plant is. Consider this “image” constantly.
- Before inserting your plant into the globe, let it almost entirely dry out.
- Every 4-5 days, mist your plant with one spray for small globes, two or three sprays for globes 3-5 inches in diameter, and more if the plant is in a wide open globe. The objective is to estimate the drying time; the longer the plant can retain moisture, the smaller the globe and less circulation. Overwatering will cause the plant to perish.
- Do you recall how your plant seemed after soaking? If it no longer has that cheerful, healthy appearance, remove it, soak it for 30 to 60 minutes, shake, and let it almost completely dry before replacing in the globe.
- Place your globes away from windows or other areas where they will receive direct sunlight. Keep in mind that the glass will make the heat and sunlight more intense. Some plants may even grow in low to moderate light, though indirect light is preferred.
How long does an air plant live?
Perennial plants are tillandsias, also referred to as air plants. According to the source, they have a lifespan of between two and five years, which indicates that they normally survive longer than two years.
The type of air plant and the growing conditions have an impact on how long they live, though. They reside in deserts, on various surfaces, and on tree branches in their natural habitat (other surfaces they can grow on).
Air plants only experience one flowering during their existence, which marks the culmination of their development and maturity.
Depending on the species, the flowers might remain in bloom for a number of months. However, the air plant will begin to die when the blossoms start to wilt and fade. Air plants develop pups or offsets before they die to carry on the same growth cycle.
Despite the mother plant dying, you can take the pups out and raise them separately. Separating the pups from the mother is referred to as “division is a method of air plant propagation.
As an alternative, you might leave those puppies grouped together ” (also known as “tillandsia balls).
Do you soak air plants with their tops up?
It is best to provide air plants with water that is rich in minerals and nutrients because they obtain many of their nutrients directly from the water. The best water is rainwater, although spring water is a close second if you don’t have a convenient way to collect rainwater. Alternatively, you might utilize well, lake, or creek water. Never use filtered or distilled water. Less minerals and nutrients are present in distilled and filtered water. Many municipal water systems include fewer minerals and nutrients and more contaminants. If you are concerned about your pH level, air plants enjoy slightly acidic water. The ideal range for alkalinity is between 5.5 and 6.0. Most frequently, tap water from the city is higher than this range, making it unsuitable for air plants. Do not worry yourself too much about PH levels. Any good, pure water would do.
After watering your air plants, thoroughly drying them off is the second most crucial step. To ensure that your air plants completely dry, put them down on a dish towel on their side or upside down. For the larger species like Xerographica, Streptophylla, and Sparkler, this is especially crucial. Within two hours of their bath, they should be completely dry to the touch. Wait until your air plants are completely dry before putting them back in terrariums and vases. If you water your plants and then put them in an enclosure right away, your plant can get rot. Your air plants will be content and healthy if you follow these straightforward watering guidelines.
How to Care for Air Plants
Before spending the time and money to create this fantastic terrarium, you might want to get a quick lesson on how to take care of air plants. Fortunately, it’s really simple for you! Tillandsias, often known as air plants, require this in order to flourish.
- Although they may tolerate some direct sunlight, air plants prefer bright light. Low light levels might abruptly cause air plants to falter and perish. Make sure you attend to their lighting requirements since once they reach that stage, saving them becomes challenging.
- It’s simple to water air plants… Put all of your air plants in a big bowl or sink and soak them in water for 20 to 30 minutes once a week. Allow them to dry on a towel, upside-down. Give your air plants a gentle shake before setting them out to drain since they are prone to rot if water is allowed to gather in their leaves.
- Add a water soluble fertilizer to the water you soak them in every other time you water them during the growing season.
I’m done now! Now that you know how to construct an air plant terrarium, you can not only showcase your plants in a stunning fashion but also enhance the design of your home.
Air Plant Terrarium Supplies
- Open terrarium or glass container that provides for optimum airflow
- Sand or gravel for aquariums
- Sculptural rocks, stones, and wood
- Ideally, different types and sizes of air plants
Our initial air plant terrarium was created with simplicity in mind. This consists of of two stunning air plants, a few stones, and white sand. Observe how the one is blooming! There is a misconception that air plants perish once they bloom. They still have a lot to do, despite the fact that they will eventually die after flowering. Blooming is a sign that the plant is preparing to generate air plant pups, sometimes referred to as baby air plants, near its base. Therefore, never throw away an air plant that has bloomed because it is still very much alive.
Air Plant Terrarium Instructions
- Sand or gravel can be added as a base to the terrarium’s bottom.
- Include rocks, stones, wood, or other beautiful natural elements.
- To achieve the desired look, add air plants. For a more understated appearance, use one or two; for an urban jungle feel, use as many as you can!
- Done!
As you can see, there are numerous varieties of air plants. Others have more coarse leaves than others, some with fine leaves. various shapes, hues, and even watering requirements.
Additionally, we wanted to give this air plant terrarium a more natural look. We gathered materials for our DIY terrarium from our neighborhood beach, including a piece of driftwood and a stone coated in barnacles. We adore this terrarium, which contrasts three distinct air plants and a small amount of preserved moss beautifully.
With the plant parent revolution, air plants are popular, and this only goes to show that they can be just as stunning and fascinating as any philodendron or fern!
Where to Buy Air Plants
We are so satisfied with the air plants, preserved moss, and terrarium that were provided by Etsy seller “Spyloh” that as of right now, we won’t purchase our air plants from anybody else!
We hope you are prepared to construct your own terrarium for air plants. Make the ideal area for your plants to be shown! We believe you’ll also enjoy our posts on What are Air Plants and Clever & Cool Indoor Garden Ideas & Projects. or check out OhMeOhMy’s DIY Branch Chandelier Air Plant Display!
There may be affiliate links in this article. For additional information, please see our disclosure.
Will sand work for my air plant?
Terrariums are a wonderful way to add some greenery to any area, and you can really make your terrarium stand out by using several types of bases! We frequently receive inquiries regarding how to exhibit air plants in terrariums, including what types of bases to use and whether they require soil. The bases and decorations you should pick to create a stunning air plant terrarium are discussed below.
You can use small pebbles, seashells, bark, marbles, preserved reindeer moss, beautiful sand, etc. for the base. Have fun with it! There are countless options for the colors and textures of the sand and rock used in terrariums.
There is no need to provide soil because air plants can survive without it. Most air plants, in fact, shouldn’t be planted in soil. Layering moss, sand, or rock is a simple way to add variety and texture to your terrarium.
Make sure the base you use is entirely dry. You don’t want your air plants to be resting against any moisture in their terrariums or containers.
You should also consider the type and size of the terrarium you are creating. This terrarium will be presented where? Will it hang or rest on a table? You can choose the substrate for your terrarium by responding to these questions. Since moss is lighter than sand and won’t shift as much if the terrarium sways, using it as a base layer may be preferable for hanging terrariums.
Small bits of bark or driftwood can give your terrarium a charmingly rustic appearance as a base or accent, but make sure the wood you pick is pest-free. We like to use orchid bark, which is available at Home Depot or Lowe’s. Use caution when utilizing logs or bark that you may find outside because they could contain insects or pests that could harm your plant.
Watering Terrariums and Plants:
- If you water your plants while they are in your terrarium, too much moisture may become trapped amid the moss, rock, etc., leading to the rot of your plants.
- Before putting the plants back in your terrarium, remove them, soak or mist them, and then make sure they are totally dry.
- No water or moisture should be present in your terrarium or next to the Tillandsia.
Alternatively, if you’d prefer a kit that includes everything you need, look no further—we also carry those!
Check out these DIY terrarium kits, which include everything you need to build one.