When a plant produces pups or offspring, it is essentially replicating itself. Succulents don’t always produce pups and offspring, but those that do essentially grow in numbers on their own. Among the numerous additional species that give birth to pups or offspring are hens and chicks, aloe, specific haworthia species, and cacti.
The pups and offshoots can be carefully removed, put in a suitable potting mix, and used to begin a new plant. By redirecting energy to the growth of the mother plant instead of supporting her pups, removing offshoots from the mother plant promotes its health.
Step 1
Look for plants that have pups or offspring. The young that develop from the mother plant are called pups and offshoots. Not every succulent plant gives birth to pups or offspring. Aloe, certain haworthia and cactus species, as well as many succulent species, do.
Step 2
Clean your knife. Make use of a clean, disinfected, sharp knife. Washing with warm, soapy water or wiping with rubbing alcohol will do this. To prevent spreading fungus or infections, be sure to clean the knife after each cutting by wiping it with alcohol.
Step 3
Locate pups or offspring that need to be removed. An offshoot or pup can be separated from the mother plant once it has reached a suitable size or begun to establish roots. When removing the pup, try to grab some roots. A pup without roots can be removed, but ones with roots that are already there will work much better. Without roots, pups or offshoots will ultimately establish roots on their own, but pups and offshoots with established roots stand a better chance of surviving on their own.
Step 4
Eliminate the branch. To gently remove the pup or branch from the mother plant, use a clean knife. Some pups or offspring are simpler to get rid of than others. The pup can occasionally be gently twisted off to separate them.
Sometimes you need to remove the pup using a sharp tool. By sliding the knife blade between the mother plant and the offshoot, carefully detach the baby plant from its mother plant. Sever the root that connects the pup to the parent plant before carefully pulling the two apart.
Insert the knife blade into the soil between the mother plant and the offshoot if you want to remove the pup while it’s still in the ground. To cut the connecting roots, slide the blade through the dirt. Then, using the sharp end of a small shovel, dig a few inches along the radial parameter after creating a 2-inch radius in the dirt around the base of the branch. By angling the spade underneath the offshoot, you can delicately pry it out of the ground to remove it.
Step 5
Set the pup down. The pup can be planted on its own after being removed. Prepare an appropriate, well-draining potting mixture, then add some of it to a tiny container. Put the pup or offspring in the ground. As soon as the plant is secure, lightly pack the earth around it.
Step 6
occasionally use water. More moisture is required by pups and offspring than by mature plants. Spray the soil with a spray bottle sparingly once every few days or whenever it seems dry. Reduce watering to once a week after the plant has a stronger root system.
Step 7
Keep away from the sun’s rays. When first planted in their own pot, shield young plants from direct sunshine to avoid sun damage. As a plant matures, gradually increase sunshine and sun exposure in accordance with the needs of the plant.
How soon should I get rid of my puppy succulents?
When a succulent pup is about 1″ (2.5 cm) in size, or big enough that you can hold it without breaking it, that is the best moment to remove it from the stem.
Why do your succulents sprout, and what does that mean?
When they don’t receive enough sunshine, succulents swell out. The succulent will first begin to turn and bend in the direction of the light source.
As it grows, the leaves will spread farther apart, making the plant taller.
The leaves are often smaller and paler in colour than usual. The succulent will typically turn green or lose the strength of its original colour when it is not exposed to sunshine.
This Echeveria ‘Lola’ is beginning to bend towards the light, and it isn’t quite as colourful as it was when I took the photo for the post about top dressings.
The majority of the time, this will occur when succulents are cultivated indoors, but it can also occur outside when succulents are exposed to too much shadow.
Should you divide succulent children?
It’s time to divide your succulents after they have outgrown their containers or have produced a lot of new plants. Often, dividing your plants is simpler than repotting a large, multi-stemmed specimen. Each repotted component can grow and fill a new container thanks to division. During the growing season, plants develop more swiftly.
How are offshoots planted?
Two of the simplest plants to create offsets are strawberry begonia (Saxifraga stolonifera) and spider plant (Chlorophytum comosum), both of which produce miniature versions of themselves along the ends of arching stems. The easiest technique to cultivate them is to surround the larger mother pot with smaller pots. Take the stolons and arrange them in the small pots with the plantlets sitting on top of the soil. You can separate each one from the mother plant once its roots have grown.
Offsets occasionally develop on the leaf surface or, more frequently, around the rosettes of the mother plant’s leaves. These can be cut off from the parent plant and allowed to grow on their own. At the leaf tip, offsets of the chandelier plant (Kalanchoe delagoensis, also known as K. tubiflora) develop. Around the leaf edges, Mother of thousands (K. daigremontiana, also known as Bryophillum diagremontianum), grows as offsets.
Water the parent plant the day before to make sure it is lush and hydrated so you can root detached offshoot. Put potting compost in an 8 cm (3 in) pot and give it plenty of water. With your fingers or tweezers, remove just a few plantlets from each leaf so as not to significantly change the plant’s look. Take great caution when handling the plantlets.
Take the plantlets and place them on the compost’s surface. Give each plantlet its own area in the container to grow, and water the compost from below to keep it moist. You can repot each plantlet into its own tiny pot once the plants have begun to grow and form roots.
Offsets are plants that grow at the base of or on succulents and bromeliads. Often, especially with cactus, you can tell that these are young plants. In some circumstances, they might be rooted to the parent plant and difficult to distinguish from bromeliads. When you are repotting the entire plant, when you can cut them off with a sharp, clean knife, is the optimum moment to remove these offsets. Make sure you grab a piece of the root when you remove any that have a tendency to grow up and around the plant’s base.
Before planting cactus offsets in compost, let them dry out for a few days. One can immediately pot up other plants. Place the plant with roots in the pot after filling it halfway, and add additional compost around it. In order to water the plant from below, firm the compost.
If you follow these instructions, you will discover that you can care for your larger indoor plants just as well as other smaller plants.
Your Succulent Isn’t Getting Enough Light
All plants require light, but succulents particularly crave it. Your pal may be leggy if you don’t provide a sunny area where they can soak up the light.
Insufficient sunshine causes succulents to develop lengthy stems. They begin to turn and spread out in search of light during a process known as etiolation, which gives them a “leggy appearance with a long stem and smaller, spaced-out leaves.
It can be challenging to determine how much light your plant needs right immediately because every plant is unique. Try transferring the succulent to an area where it will receive more light if you find it starting to grow a long stem without adding more leaves. You might want to think about buying a tiny tabletop grow light if your house doesn’t have a place where the sun shines.
They’re reaching for the light source.
I had to completely prune back my succulents for a number of reasons, including #1 and the pack rats eating them as appetisers. This pot is situated in a corner directly next to my front entrance. I rotate it every two to three months, but it won’t fit in the area if the planting becomes too leggy and the stems grow too long. The light isn’t excessively low; rather, it’s only that it isn’t uniformly illuminating the plants.
The light they’re growing in is too low.
A tiny portion of my Santa Barbara front garden. Every year or two, I had to trim back the graptoveria, narrow leaf chalk sticks, and lavender scallops because they were encroaching on the sidewalk. Yes, a rosemary plant in blossom is the huge shrub in the background.
After two or three years of growth, the paddle plant patch under my Giant Bird of Paradise in Santa Barbara needed to be trimmed down. Along with many other fleshy succulents, kalanchoes frequently have lengthy stems.
The leaves on a succulent stalk won’t regrow once they become naked. It must be pruned back so that it can either be rejuvenated from the base or propagated by stem cuttings (the piece of stem & roots still in the soil).
Here’s what you do with those towering, stretched-out succulent stems, whether your succulents are growing in the ground or in a pot.
When Should You Cut Back Your Succulents?
Summer and spring are ideal. Early fall is also OK if you live in a temperate region like I do. Before the cooler weather arrives, you should give your succulents a couple of months to establish themselves and take root.
How should aerial roots on succulents be treated?
Although you don’t have to, you can do it if the roots are becoming too unattractive. However, make sure to give your succulent more light and deeper watering (though not necessarily more frequently).
If the roots are left in place, they can gradually get thicker or harder and resemble a little branch. That is typical.
Although aerial roots aren’t a major issue, you should be aware of them so you may modify how you care for your succulent. This is a telltale indicator that your succulent is not in the best of health.
Do cacti become overcrowded?
Succulents frequently arrive jammed together cheek to jowl in lovely tiny plates. Succulents are among the plants that don’t do well in this arrangement. One of the best ways to promote mould and bug infestations is overcrowding.
The second problem is that although though succulents are excellent at surviving on meagre supplies, they still require food and water. If there is too much competition, they will probably lose out. If your succulents are delivered in a crowded arrangement, carefully remove them and give each one its own roomy miniature dune.
How are puppies removed from Echeveria?
The plant must be full and strong, with access to enough water and nutrients to support growth following cutting. If your equipment is tidy and sharp, you can collect Echeveria puppies with a knife or pruning shears. I personally use a set of succulent tweezers that were created just for the task.
Can cuttings be planted directly in the ground?
As long as you have properly prepared the cuttings, you can place them directly into the soil. According to Chick-Seward, “cut under a node at the bottom and above a node at the top.”
Remember that the soil must be able to drain well; as a result, if your garden soil is heavy clay, for instance, you will need to make a suitable potting mix. Fill tiny pots with one part compost to two parts grit with compost, advises Raven.
What You’ll Need:
- slicing shears
- gardening mitts (for handling spiny varieties)
- a little trowel
- potting soil for cacti and succulents
- jars with sufficient drainage holes
Remove Some Leaves or Behead
Take a few leaves at random from your succulent plant, gently twisting each one off the stem without breaking it.
These can be cut off the bottom of the stem, which will be discarded, when it begins to grow lanky.
To remove a specific leaf from a plant, such as a Christmas cactus, you might need to use scissors.
If you’re “beheading,” cut the stem of the plant head cleanly with your scissors or clippers about an inch below the lower leaves.
Plant
When roots start to form, either choose a site in your garden that is ideal for planting or fill well-draining containers of your choosing with potting material.
Sunshine and well-drained soil are ideal for succulent growth. They get paler in the absence of sunlight, and they decompose in excess moisture.
When the sun is less powerful, such as in the early morning or late afternoon, plant in a sunny location.
To lift the cuttings above the edge of your container or garden surface, pile dirt higher. To stabilise the roots, gently tamp the earth down; do not water.
Water and Feed
It’s time to buy a succulent/cactus food at this stage, such as Miracle-Gro Succulent Plant Food, which is sold on Amazon. administer as directed by the manufacturer.
Succulents can also be propagated via cuttings that are placed on top of potting soil and allowed to callus off so they can root themselves in the soil.