Fortunately, trimming a monstera is not too difficult. Since they are a hardy plant, they don’t need to be meticulously pruned. In other words, even if you don’t perform a great job, your plant will probably be alright.
You’ll want to remember a few things, though:
1. Put on gloves. When pruning or propagating your monstera, be sure to use protective gloves because the sap is poisonous and can cause severe skin irritation.
2. Use a tidy, sharp instrument. You can avoid crushing or damaging the stem by using sharp pruning shears or a knife to make the cut. Your plant is also shielded from hazardous microorganisms by clean tools. Bacterial diseases can even spread to your other plants and are difficult to treat. (Protect your monstera from insects, fungi, and bacteria with our Houseplant Leaf Armor!)
Instead of slicing the stem off, just give it a good snip or chop while cutting. The cleanest cut will be made as a result.
3. If you can, prune in the spring, especially if you want to promote growth. Growth spurts occur in the spring and summer for the majority of plants, including monstera. Pruning in the spring will yield the best benefits and hasten the recovery of your plant. You should prune in the spring because that is when your cuttings will grow the fastest if you intend to propagate them.
4. Arrange the slices. Starting at the base of the stem, remove any outdated or diseased leaves.
Cut where you want the plant to grow if you are pruning to promote growth. Make a top cut if you want it to grow higher.
When the time comes to actually trim your monstera, keep in mind that pruning promotes growth so choose where to make your cuts. You can safely reduce the plant’s size if you’re pruning to manage your monstera’s size. Just remember that it will eventually need to be done again because it will grow back.
5. Be sure to cut below a node if you’re propagating. Don’t be concerned if you’re only trimming to reduce the size of your plant or get rid of dead leaves. However, if you want to grow your cuttings from them, make sure that they have a node, which is a tiny knob that develops on the stem opposite a leaf. When your cutting begins to grow, these will subsequently develop into aerial roots!
Try our new Houseplant Propagation Promoter!
6. Prevent unintentional proliferation. When you’re done pruning, be careful to dispose of your cuttings in the trash if you’re not going to propagate them because if you place them in a compost pile or somewhere else where they can root in the earth, they’ll start to grow roots.
I’m done now! Don’t be afraid to prune your monstera; it’s an essential yet easy component of care for this plant. This plant develops rapidly and bounces back quickly from pruning. Good fortune!
How should a Monstera leaf be cut off?
DO NOT CUT OFF THE TOP LEAF OF YOUR MONSTERA AT THE BASE OF THE PETIOLLE IF IT HAS BLACK SPOTS (the stalk that holds the leaf up from the main stem). The top growth point, or terminal bud, is located on the top leaf petiole. The petiole’s side has a bump where the subsequent leaf will develop if you look attentively. Leave the stalk intact and only remove the leaf, allowing your Monstera’s new growth to continue to grow.
It has already generated a new leaf from its petiole for a lower leaf. A lower leaf’s connection to the main stem can be safely severed at the bottom of the leaf. The petiole may eventually die and fall off the stem if you leave some of it connected.
Monsteras with most leaves dead
Cutting off an excessive number of leaves at once can be harmful to a Monstera plant’s ability to recuperate if the bulk of the leaves are damaged. Keep any leaves with healthy green sections since plants require them to photosynthesize. To allow the plant to continue making energy from the remaining green leaves, first only remove the leaves that are the most severely injured or completely dead. If the remaining leaves continue to deteriorate, you can remove them later.
It’s still possible to rescue your plant even if all of its leaves are dead. An axillary bud, also known as a lateral bud, will activate and branch off to create a new leaf as long as the stem and roots stay in good condition. To activate several buds, you can also cut and propagate your Monstera as stem cuttings. This method should only be used as a last resort because it will be extremely slow without leaves.
Which leaves of my Monstera should I chop off?
It is advisable to to remove your Monstera entirely if the stem has broken. Cut it off at an angle as close to the stem’s base as you can using a sharp knife. Because the old, damaged stem can’t be repaired, it is preferable to let the plant focus its resources on developing new growth.
Do I need to remove the young Monstera leaves?
Pruning is a crucial component of any plant care regimen. Pruning gets rid of leaves that no longer help the plant but are still consuming its resources. As a result, the healthy leaves and new growth can be supported with more energy! You may manage a plant’s size and shape via pruning. Therefore, remember to prune your monstera!
Additionally, pruning can help your plant grow and allow you to manage where it produces new leaves (and in the case of some plants, branches).
Because your monstera occasionally needs a little additional assistance getting rid of dead or dying leaves, pruning is especially crucial.
However, pruning is primarily a useful method for managing a monstera’s size. This plant grows really big! If you live in an apartment with 8-foot ceilings, this is crucial because monsteras can grow up to 30 feet outdoors and 10 feet indoors.
When should I trim the leaves on my Monstera?
After you have pruned your leaves, you can reuse the cuttings by growing more of them or by composting the dead leaves.
Propagate your cuttings
Making a new plant from a cutting of an old plant is known as propagating your cutting.
Your cuttings can be rooted in either water or soil. The method you choose to utilise generally depends on your personal preferences.
To see how long the roots have grown and whether there is any rotting, I prefer to cultivate my Monstera cuttings in water.
Make sure the plant is not overwatered if you wish to place it in soil. This could result in the formation of germs and mould, which could harm or kill your plant cutting.
Use the dead leaves as compost
It is a smart notion to compost the leaves from a plant whose leaves have been clipped after they have died or become yellow.
Dead leaf composting is a reasonably easy process:
- Put all of the plant’s leaves in a bag after you’ve collected them all. Mixing some grass clippings with the leaves is also a good idea.
- Compost makers and natural fertilisers can be added to hasten the composting process.
- If your compost mixture seems dry, be sure to add extra moisture, and make small holes in the bag so that air may reach the compost.
- To achieve the finest effects from your handmade compost, keep the bag in storage for at least two weeks.
In conclusion
Making your Monstera happy by pruning. You’ll be able to maintain the appearance of your living area and see fresh growth. Additionally, it is a great technique to prevent the illness from spreading after a leaf becomes infected.
The best time to prune your Monstera is in the early spring. Avoid the dormant season because it could cause more harm than good to the plant.
Do I need to remove the damaged leaves?
A houseplant’s appearance can also be ruined by dead or poorly formed leaves. Both damaged leaves and missing plant branches can be removed. You can use sharp scissors to trim overly ambitious stems back to just above a leaf point when they start to spoil the plant’s form. Simply remove the dead leaves; do not leave any little snags that will die back. It is advisable to trim the stem back to its base with sharp scissors in order to eliminate any dead leaves that are at the top of the shoot.
The dead blooms on houseplants can be removed individually and thrown on a compost pile. Azaleas bloom profusely over several weeks. Pick off the initial ones as they pass away to make room for the next ones to emerge. It is known as deadheading. You may remove each dead blossom from a cyclamen by pulling it off with the stalk. It will just snap off at the desired location if you give it a little tug. The stem would steadily deteriorate if you merely removed the blossom, which would stimulate the deterioration of other blooms and stems as well. Moreover, it just looks horrible. Don’t leave the blooms and stems at the plant’s base; instead, add them to the compost pile.
Should I cut the brown tips off my plant?
Yes, you should remove the brown plant tips. However, this does not need you to remove the entire leaf. Just remove the burnt tip instead. The leaf automatically corrects itself to keep its original structure and form.
How often should you water a Monstera?
When monstera is actively developing in the summer, it needs to be watered once a week. It can go up to three weeks without water during the winter, when plants are resting.
Do Monstera leaves regenerate after being cut?
What do you do now that you have a clipping from your Monstera plant? Will the plant ever produce those lovely, large leaves again, or will it perish forever?
Well, don’t worry; the Monstera has magical abilities and will regenerate all of its lost stems and leaves (at least if you take good care of it)!
The Monstera will regenerate a new growing point from the closest node where the cut was made after being made. The portion of the plant that you removed will have fully recovered within a few months.
Light, water, soil, humidity, and fertilisation are just a few examples of the variables that affect how quickly a plant will develop.
How would a leggy Monstera appear?
In their original environment, monsteras are essentially climbing vines that attach to big trees. These plants will resemble a shrub when grown indoors, especially when they are young.
The thickness of the stems, the size of the leaves, and the length of the internodes distinguish a healthy Monstera from one that is lanky as it develops into a vine.
Leggy Monsteras lack the full, bulky leaves and have longer, thinner stems.
A leggy Monstera will also have more space between its leaves. A plant is considered lanky if it appears that there are more stems than leaves.
How do you begin a cutting of Monstera?
How to grow delicious monstera. You will require a Monstera deliciosa plant, cutting-edge scissors, and either a pot of soil or water.
Pick a stem to cut.
Pick a cutting of stem that has numerous nodes or leaves. While some aerial roots are useful, they are not necessary.
Pick a growth medium.
Your cutting can be multiplied in either water or soil. Water functions equally well as dirt and has the advantage of making progress monitoring simpler.
- Bright and cosy
- Keep wet and fresh.
If growing in water, make regular water changes. Give it regular waterings if it’s growing in soil to keep the cutting damp.
Disregard it!
If you took the cutting during the winter dormant phase, it can take some time for any growth to develop.
Pot up
When you spot established new growth, such some roots and a leaf that hasn’t fully expanded, pot it up in a suitable container.
Expect no new leaf growth.
Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.
Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.
It lacks the tissue needed for cell division and the development of new leaves.
The leaf can survive without a node.
To keep turgid and fresh, the leaf will continue to absorb water by osmosis.
However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.
Can a leaf from a Monstera plant grow in water?
The Monstera deliciosa can be easily rooted in water, just as many other plants. In addition to creating a stunning display piece, water propagation is a reasonably simple method of growing numerous new Monsteras with little effort. A few simple tools, a lot of sunshine, and lots of time are all you need.
You must locate a region of the Monstera deliciosa plant that has a node if you want to root it in water. Place the cutting in water in a location with bright, indirect light after using sharp shears to remove the plant beneath the node. After a few weeks, the cutting’s tip should start to sprout roots.
There is much more to this process than what is described above, but this quick summary gives you a decent idea of how simple it is to grow a Monstera in water. The remainder of the essay will cover the specifics of rooting a Monstera in water, what to expect from a cutting that has been propagated in this manner, and some advantages and disadvantages of water propagation.