Philodendron Pink Princess should be grown in a bright spot with indirect light and in a pot with wet, well-draining soil to thrive. When the top 1 inch (2.5 cm) of soil is dry, water it. Maintain a medium-high humidity level, a temperature range of 60°F to 84°F (16°C to 29°C), fertilize every a month, and prune stems to promote bushy growth.
Despite its exotic appearance, the pink Philodendron erubescens is a simple plant to maintain. However, because of its stunning pink variegation, there are a few important care instructions for this plant. The dark green-burgundy leaves with brilliant pink patches will stay vibrant if you follow this maintenance recommendations.
How do you take care of a pink princess philodendron?
The Pink Princess Philodendron prefers loose, well-draining, highly organic soil with bright, indirect light for the best variegation. When the top few inches of soil get dry, water heavily. Temperatures of 55-95 degrees Fahrenheit (13-35 degrees Celsius) and humidity of 50% or more are ideal. Every 4-6 weeks, use a balanced fertilizer in moderation.
How do you get pink in pink princess philodendron?
The Pink Princess generates a brighter and crisper pink variegation the more light it receives. Avoid shining direct sunlight on the plant, especially the pink leaves, which are susceptible to sunburn. Place them near a south-facing window or under grow lights to help them thrive. Depending on your set up and coverage area, the VOGEK LED Full Spectrum Grow Lights or the MARS Hydro TS 1000W (if you have a lot of plants to shine on) are some of the grow lights I recommend.
Why are pink princess philodendron so expensive?
The pink princess is a high-priced item. This is because, even if the mother plant is widely variegated with pink, growers cannot ensure that their philodendrons will turn out pink enough to be sold as a pink princess philodendron.
If you want to acquire one of these stunning plants, a pink princess philodendron can be easily found on Etsy! One of my favorite Etsy vendors has created this stunning pink princess.
Make sure you buy one from a reliable source, regardless of where you buy it.
Why is my pink princess not turning pink?
The pink could fade away as the quality deteriorates. It’s possible that cells from the mother stock plants were removed for tissue culture while they were still recovering. If the plant hasn’t fully healed from its prior cut, new growth may be immature, implying that the quality has deteriorated.
Can a pink princess philodendron revert?
This is for Pink Princesses with little to no variegation on the bulk of the leaves that have reverted or mostly reverted. They may eventually produce pink flowers, or they can be pruned to encourage more development.
This is the king of the houseplants! The colour of Philodendron “Pink Princess” (reverted) is much sought for. The leaves are swathed in varied levels of pink variegation, ranging from dark green to practically black. Variegation appears and disappears, and each leaf is distinct. Despite its delicate appearance, this is a robust and easy-to-care-for houseplant that will add a splash of color to your home.
3 to 6 feet tall, shade to partial shade, 45 to 95 degrees, allow plants get somewhat dry between waterings
You agree to the terms and conditions of this sale by purchasing this plant. Please see our FAQ and What to Do When Your Plant Arrives guides for more information.
Winter Shipping Assurance is available to protect your plant from harsh winter conditions while it is being sent.
Is philodendron pink princess rare?
A Philodendron Pink Princess, as the name suggests, is a rare, variegated member of the philodendron family. The philodendron erubescens, sometimes known as the ‘blushing philodendron,’ is a flowering plant in the Araceae family native to Colombia that has a stunningly unusual appearance. The Philodendron Pink Princess is a sturdy evergreen climber with magnificent pink and dark green heart-shaped leaves that may easily grow up to an astonishing 9″ (22 cm) long and 5″ (12 cm) broad. No two house plants have the same appearance due to the variegated nature of this sought-after house plant, and they can be tough to come by due to their broad popularity. Chlorophyll, a plant-greening ingredient, is vital in developing variegation on this house plant, as its absence dictates the pinkness of the leaves. Although pink princesses with a lot of variegation are considered more desirable, green leaves are necessary for the plant to photosynthesize. More importantly, chlorophyll aids in the production of oxygen and glucose for optimal growth, thus those green leaves are keeping the plant alive and well!
How do you care for a Philodendron Pink Princess?
With a name like pink princess, you’d expect this houseplant to be a demanding diva. The best aspect about owning this plant is that it’s low-maintenance and doesn’t necessitate any specialized care. The pink princess, like other house plants, thrives in well-drained soil with a little humidity. Allow the top inch of soil to completely dry between waterings. We appreciate that this is a unique house plant, but don’t overwater it, as this will result in root rot, yellowing leaves, and a wilted, sad appearance. We recommend placing your plant in an east or west-facing room that gets sunshine for half of the day, as it thrives in strong, indirect sunlight.
There are various ways to keep a prink princess’s beautiful pink leaves looking well. Make sure it gets lots of indirect light to help bring out the pink, as too much direct light will turn the foliage yellow. The plant’s young leaves will be a dark green with white variegation. The plant will turn practically black with pink splashes as it matures. A leaf will naturally become yellow as it ages, but as long as the surrounding leaves remain healthy, there’s no reason to be concerned!
A pink princess’s health and growth rate are also affected by room temperature. Temperatures between 16°C to 29°C are ideal for optimal growth. Anything above 18°C is recommended for your pink princess’s development.
How do I get more variegation in pink princess philodendron?
In terms of temperature, these plants thrive in temperatures of 60 degrees Fahrenheit or above. The temperature range of 60-85F (16-29C) is ideal for growth. It’s fine if the temperature drops below 60 degrees Fahrenheit at night, as long as it’s only for a short time. Maintain a constant temperature of 55 degrees Fahrenheit for your plant.
CLIMBING SUPPORT
Because Philodendron erubescens is a vining plant, provide it with a trellis or post to climb on. Tie the vine lightly to the support structure as it develops.
You’ll get the best results from this plant if you give it some nice support.
Your plant will enjoy the support, whether you use a moss post, a cedar board, or something else.
Don’t miss my tutorial on how to make your own moss pole.
It’s better and less expensive than any moss post on the market!
If you don’t want to deal with providing support, you can always cut and propagate your plant.
The original plant will produce new growth and become bushier as a result of this.
If you want to go for that look, go for it!
PRUNING TO MANAGE VARIEGATION
There are a lot of folks that prefer pure pink leaves. However, be cautious about what you desire for. The all-pink leaves have no chlorophyll, and if you don’t take care of your plant, it will die.
I’ll refer to an interview I had with Steve’s Leaves’ owner and greenhouse manager.
We talked about variegated plants and how important it is to prune them when necessary.
On your plant, you want a balance of non-variegated and variegated leaves.
If your plant becomes inundated with all green leaves, it may eventually revert to all green and you’ll have to say goodbye to Pink Princess.
You could have a Green Princess, and who wants a Green Princess?
On the other hand, if you receive ALL pink leaves or leaves that are more than half pink, your plant will slowly deteriorate over time because the variegated areas of the leaves lack sufficient chlorophyll to keep the plant alive.
If you don’t intervene, the plant will essentially starve to death.
Chlorophyll is used by plants to photosynthesize and produce food using the sun’s energy.
If your plant has a lot of variegation, it suggests it isn’t producing enough nourishment.
My Philodendron Pink Princess needs to be pruned since it was producing totally pink leaves.
I genuinely rooted and sent the part I chopped off to someone.
I don’t know if it made it or not, but she was prepared to take a chance!
You’ll need to cut your plant back a bit if it’s started to grow all green leaves or all pink foliage.
Simply cut back your plant to the next leaf with a balanced variegation.
My plant began to sprout back leaves with a more balanced variegation after I clipped off the all-pink leaves.
The plant’s growth from the node where you trimmed it back should be more variegated.
Simply said, the “node” is the point where the leaf meets the stem.
At the nodes, new growth is formed.
Of course, if you do receive entirely pink leaves, it’s good to take a moment to appreciate the beauty.
Simply don’t keep them on for too long, or your plant may begin to wilt.
PINK PRINCESS PROPAGATION
I’ve published a separate page outlining three amazing propagation methods, including one that’s a little different, to help you grow your collection as quickly as possible!
Growing Pink Princess from seed is one approach that I do not discuss in that propagation piece.
Pink Princess seeds can be found in a variety of places online.
If you try to grow these from seed, you’ll end up with Philodendron erubescens, which has all green leaves.
You won’t get an exact genetic replica of the plant from seeds.
So save yourself the aggravation and money by not buying any Pink Princess seeds.
Are you looking to purchase a Pink Princess?
On Etsy, look for Philodendron Pink Princess (link to Etsy).
One of my favorite places to buy plants is Etsy, which has an incredible selection!
It’s an excellent one-stop store.
IS YOUR PINK PRINCESS DYING?
Have you recently received a Pink Princess in the mail that doesn’t appear to be very appealing? Maybe it’s having trouble developing, or it’s growing slowly? Are there any brown stains on the leaves?
Don’t miss my blog entry, Pink Princess Philodendron:11 Critical Problems & Solutions.
I’ve compiled a list of the most common issues that my readers have encountered and discussed why they arise.
If you just got your plant in the mail, make sure you don’t do these five rookie blunders.
How much is a pink princess philodendron worth?
Houseplants are one of the most cost-effective and attractive methods to elevate your interior décor. Orchids. Succulents. Plants that grow corn. The list might go on forever. However, did you know that some houseplants may be quite costly? Take a look at the philodendron pink princess, which, according to Apartment Therapy, can fetch $100 or more just for its cuttings (the part of the plant that you use to re-plant and grow your own). We can understand why they’re so expensive, given how beautiful they are.
Can you propagate pink princess?
Pink Princess, like all Philodendrons, is easy to reproduce from stem cuttings. Just below a node where leaves sprout, cut the stem off. Make sure each cutting has at least three or four healthy, variegated leaves.
Place your clippings in a water-filled jar or vase. Every 2-3 days, change the water. Within a couple of weeks, you should notice new roots.
When the roots are a couple of inches long, place the cutting in its own pot with appropriate substrate and treat it like a mature plant.
If your plant has numerous stems emerging from the root ball, just divide the root ball in half and repot the two plants in two separate pots instead of one.