Following these fundamental criteria will make repotting a houseplant simple:
- The day before you intend to repot the plant, water it first.
- Invert the pot by placing your fingers over the top of the root ball. On a sturdy surface, such as a table or counter, tap the pot’s rim. Run a knife between the pot and the root ball to loosen the roots if the root ball is stubborn.
- When repotting a houseplant into a clay pot, check the roots and eliminate the crock from the center of the root ball. Tear the roots loose. It could be necessary to apply a rigid label or sticker.
- Then choose a clean pot that is a few sizes larger than the one from which you just removed the plant—generally moving up a pot size or two.
- Add a good, solid handful of new compost to the pot’s bottom. On top of that, in the middle, place the root ball. To properly cover it with compost, make sure the surface of the root ball is below the rim. Put some new compost around and over the plant once you’ve got it in the right spot. Don’t pack the compost too firmly into the pot. Give the roots enough room to spread and expand.
- Finally, if you feel it’s required, top it off with extra compost and gently firm it up. Make careful to leave enough room on top for watering as directed. Place the plant in a location where water can drain freely, and then slowly trickle water onto the plant to fill the top watering space. Place the plant in an appealing outer container to catch any surplus water and let any additional water drip away. This plant won’t need watering again until the compost starts to show signs of drying out.
Knowing how to repot houseplants will allow you to enjoy them all year long.
How should a houseplant be repotted?
Although repotting your plants may seem difficult, we have some advice to help you succeed.
First things first: repotting refers to replacing the soil or potting mix, not necessarily the planter that it is now in. The nutrients in new soil are new. This is fantastic news if you adore your present planter, but it’s also okay if you want to get a new one or your plant has clearly outgrown its existing container. Try to choose a planter that is no more than 2″ larger in diameter for tabletop planters and no more than 4″ larger in diameter for floor planters when choosing a new one. Your new container might just need to be an inch larger if you’re repotting a really tiny plant! The size of your plant’s new home is crucial because we tend to give it more water in larger planters. Small plant in large planter with loads of soil and water results in unintentional dying. You want to give your plant some additional room to expand in the coming months rather than drowning it in soil.
Repotting should be done on average every 12 to 18 months, depending on how quickly the plant is developing. Some slow-growing plants, like cactus, can live for years in the same pot with only a soil resupply. The best time to repot your houseplants is typically in the spring, at the beginning of the growing season.
If you notice one or more of these indicators, you’ll know it’s time to report:
1. The grow pot or planter’s drainage hole(s) are being penetrated by roots 2. The plant’s roots are almost pushing it out of the planter. 3. The plant’s growth is significantly slower than usual (different than winter dormancy) 4. The plant is quite top-heavy and is prone to falling over. 5. The potting soil dries out the plant faster than before, necessitating more frequent waterings. 6. The plant’s foliage is larger than its present planter by more than three times. 7. The plant or planter has a pronounced salt and mineral buildup 8. You haven’t repotted your plant in more than a year.
What you’ll need on hand is as follows:
Of course, whether it is a new or existing factory.
The container you’re using for planting (if reusing a container, make sure to thoroughly rinse the inside first)
new potting soil
If your planter does not have a drainage hole, use lava rocks or something similar.
If you’re touching a plant like a Ficus elastica that has unpleasant sap, wear gloves.
a water bottle, a sink faucet, or a watering can
a newspaper, sheet for pots, or surface that is simple to clean
1. Take the plant out of the pot or planter it is currently in. Your plant will slide out of its current container if you grip it firmly by the stems or leaves while turning it sideways and tapping the bottom of the container. With a few little tugs on the stems’ bases, you might need to assist it a little.
2. Take the roots out. Use your hands to gently loosen the plant’s roots. Make sure to keep the thicker roots at the base of the leaves and cut any extra-long threadlike roots. Unbind the roots as much as you can and give them a trim if your plant is root-bound (the roots are growing in very small circles around the base of the plant).
3. Get rid of the old potting soil Remove at least a third of the old potting soil that is encircling the plant’s roots. You should give your plant new potting soil or mix because as it grew, it may have consumed all or part of the nutrients in the old mixture.
4. Include fresh potting soil Fresh potting soil should be added to the empty planter, and it should be packed down to eliminate any air pockets. Before adding the potting mix, layer the bottom of the planter with lava rocks or something comparable (rocks, gravel, etc.) if it has a drainage hole. The idea is to carve out areas for the additional water to collect in and flow away from the roots of your plant.
5. Include a plant. Make sure your plant is centered before placing it on top of the newly added layer of soil in the planter. Then, pour extra potting soil all around the plant to secure it. You want the roots to have room to breathe, so avoid packing the planter with too much soil.
Water and pleasure. The potting soil should be evened out, then water well. It’s important to remember that a plant that has just been re-potted doesn’t require fertilizer.
Can I pot indoor plants during the UK winter?
As they mature, plants prefer to be potted up into bigger containers. Greater soil volume can nourish the root systems in larger pots. Years of growing in a pot can cause plants to become root-bound, which can result in death. Repotting indoor plants in the winter allows the dedicated gardener to avoid getting their fingers frost-bitten! If you notice roots sprouting out of the drainage holes at the bottom of your pots or on the surface of your pots, your plant likely needs to be repotted. Another indication that your plants are root-bound is slow growth. Look to check whether the roots are wrapping over the pot’s edge; if so, your plant needs to be re-potted. Another incentive to repot now, before the spring season, is that many indoor plants like to be potted before a new growing season. Pottery from all around the world is available at Meadows Farms and the Great Big Greenhouse. In the winter, when we receive shipments earlier, the selection is at its best.
Make sure the pot you choose complements the interior design of your house and is the right size for your plant. If you’re repotting, avoid using large pots. A reasonable rule of thumb is to make the present pot two inches larger. The roots may rot if the new pot is too large and can contain too much water. Make sure the pots have drainage holes so that water can pass through the soil. Choose a saucer that matches the new pot to protect your carpet or hardwood flooring. As the planting media, use a premium potting soil blend that has been fertilized. For the majority of indoor plants, Just Natural Potting Soils are a fantastic product.
Make repotting simple by using the advice below:
- Take the plant out of its pot. To dislodge the plant, you might need to run a knife or trowel along the pot’s edge.
- If the roots are coiled, pull them apart or, if they are very root-bound, trim them.
- Place the plant in the center of the new container after adding soil to the bottom, then fill the pot with quality potting soil.
- Water deeply to settle the dirt and wet the roots.
After being replanted, it is normal for the plant to experience shock. While the plant heals, try to keep it out of direct sunlight for a few weeks and maintain a consistent moisture level in the soil.
Repotting indoor plants: Is it necessary?
Repotting your houseplant into a larger pot will become essential as it becomes bigger and the roots either start to grow through the drainage holes or become pot-bound.
When repotting, should old soil be removed?
Although repotting houseplants may seem like a straightforward process, there is always a chance that the plants won’t thrive in their new environment. Making sure the plant’s roots are free of old dirt can prevent transplant shock.
When repotting, removing the old soil from the roots will eliminate salt buildup and guarantee that the roots are surrounded by fresh soil that is rich in minerals and nutrients. Before repotting, exposing the roots will provide a chance for root sterilization to get rid of any unwanted fungus or disease.
Plants growing in containers need to be occasionally replanted to maintain their health. Both the right time to repot a plant and the right way to do it safely should be understood.
Do indoor plant containers require holes?
Plant roots don’t prefer to stay in water, with the exception of a few aquatic species. They must exchange carbon dioxide and oxygen with the surrounding air, because too much water seals up the soil’s air spaces. Without drainage holes, plants in containers are more likely to become overwatered. The soil at the bottom of the pot may be drenched with water even if the soil surface appears to be dry.
Root rot, a dangerous ailment that can quickly kill your plants, can result from waterlogged soil. Yellow leaves, wilted leaves that don’t recover after watering, and leaf drop are symptoms of root rot. The roots of the plant may be sticky, mushy, or black or brown if you take it out of the container.
To avoid salt buildup in the potting soil, it’s also important to make sure that pots have enough holes. Salts in fertilizers and tap water can damage plants. Some of the salts are excreted by plant roots along with the water, and over time, these salts build up in the soil. Salts are flushed out of the soil when you water deeply and allow the water to escape through the drainage holes in the bottom of the container.
Without drainage holes, salts are never eliminated from the soil; instead, they just keep accumulating, giving your plants an unhealthy environment. If salts do accumulate in your potting soil, you might notice that the plant’s leaves are becoming brown at the tips and margins or that a salt crust has formed on top of the dirt.
To prevent dripping on the furniture or floor, many homeowners store their indoor plants in saucers while they are not in use. This is acceptable, but watch out for water that may collect in the saucer and wick back into the potting soil. Make careful to frequently empty the water from each saucer. Another option is to water your plants in the kitchen sink, move them back to the saucers once they drain, and then do it again.
When repotting, should the roots be disturbed?
Most healthy plants grown in containers eventually outgrow their containers. Repotting a rootbound plant is a fantastic approach to give it new life. Repotting container plants was something I did a lot of while I managed a greenhouse.
The first step is realizing when it’s time to repotted. Roots that are densely packed inside of a pot or sticking out of drainage holes, soil that dries out rapidly, soil that has degraded, and water that remains on the soil’s surface for an excessive amount of time after watering are all warning signals. Most of the time, a plant just appears top-heavy or as like it might burst through the container. The optimal time to repot the majority of plants is in the spring or summer, when they are actively growing. However, when the need arises, plants can typically manage repotting.
When a plant is prepared for repotting, the soil should slide out intact. The plant might not require repotting if a large portion of the soil separates from the roots. If it does, there will probably be a substantial soil and root mass that resembles the pot that was just removed. The roots ought to be white or light in color. Roots that are black, gloomy, or smell bad are typically indicators of a major issue, such a fungal illness. The removal of a plant from its pot is the next phase. It is beneficial to adequately hydrate the root ball in advance if a plant is rootbound. Invert the pot and use one hand to hold the top of the root ball for plants in small to medium-sized pots. With your other hand on the pot’s base, pitch the pot downward before stopping abruptly. After one or two throws, many plants will escape. If not, while still holding the pot in both hands, tap the edge against a solid surface, such a potting bench. To free the plant, you might need to give it a couple solid blows; take care not to crack the pot.
Roots that are tightly packed in a pot don’t absorb nutrients well. Trim the roots and loosen the root ball before replanting to encourage good nutrient absorption. For this task, use a sharp knife or pruning shears, and if required, remove up to the lowest third of the root ball. If you chop off a dense tangle of root tissue, don’t be shocked. Additionally, cut the remaining root ball three to four times vertically, about a third of the way up.
To assist prevent the plant from strangling itself as it develops with its own roots, cut through any circular-growing roots. Remove the outer layer by shaving or peeling it away if the roots are thick along the sides of the root ball. Or use your fingers to gently detangle the root ball as if you were mussing someone’s hair. The upper border of the root ball should also have this done.
The new pot’s size should be determined by the plant’s potential growth rate, how well it is now developing, and the intended final size for the plant. rely on your own perception of what a specimen of a specific species should be like in good condition. When in doubt, choose the next larger size of pot.
Cover the pot’s drainage hole(s) with a paper towel, coffee filter, mesh screen, or pot shard to prevent soil from dripping out the bottom. To avoid sealing the hole, if you use a pot shard, place it convex side up. Although it’s customary to place pebbles or charcoal in the bottom of pots, I don’t advise doing so because they obstruct drainage and take up valuable space.
Put a few inches of damp soil in the pot and lightly push it down to repot a small, manageable plant. Set the plant inside the pot, centered. The top of the root ball should ideally rest approximately an inch below the pot’s rim. Gently lift the plant and add more soil if it is buried too deeply. Remove the plant and remove some soil if it is sitting too high, or just throw the soil out and start anew.
Now add soil to the area around the root ball. There are two methods for doing this work, stuffing and filling, as I’ve observed. Stuffers enjoy packing soil tightly around a plant. Fillers prefer to completely fill the pot and allow the soil to settle in over the course of the first few waterings. Although I typically fill in, I occasionally do some work, especially when it comes to top-heavy plants that need to be steadied. Leave some space at the top, whether you pack it or fill it, so that the pot can contain enough water during each watering to completely hydrate the soil.
Receive our most recent advice, training, and tutorial videos in your inbox.