Stem cuttings are the preferred method of monstera propagation. Cuttings from Swiss cheese plants are simple to root. When using cuttings, you can either root them in water first or just bury them in the ground. Cuttings should be made immediately following a leaf node, with the bottom-most leaves removed.
Then, either partially bury the swiss cheese plant cuttings in the soil itself or root them in water for a few weeks before transplanting to a pot. There is no requirement for rooting hormone because they root so readily.
How long does it take a Monstera cutting to grow?
It takes patience to propagate. After 3-5 weeks, the roots from your cuttings should start to grow. The new roots should be at least an inch long; this is the primary thing you want to check for. Your cutting is prepared to be planted into a pot once it develops several roots that size.
Can a new Monstera be grown from cuttings?
If you are an over-thinker (how deep, how long, what soil, where, when, how??) like me and the phrase “simply bung it in a pot” makes you nervous, don’t worry! I also have you.
Make yourself comfortable and prepare to relax as I thoroughly address all of your concerns and questions below with a ton of pictures.
What parts of a Monstera will propagate?
Stem cuttings make it very simple to reproduce monstera. You must choose stem sections that have at least one node when choosing stem.
New leaves and roots will form at the nodes, which are circular rings that are brownish in color and are located where a leaf once was on the stem. One leaf and several roots can be supported by each nodal area.
- A stem segment that is 20 cm long and has two to three nodes provides many opportunities for the emergence of new roots and leaves; the longer the segment, the more energy it has available to fuel new shoots.
- I have propagated from pieces as tiny as 5 cm long, with one node.
- The node is where new development, such as roots, might arise if a section of stem has a leaf emerging from it. Your existing leaf’s petiole will sprout new leaves on that portion.
What parts of Monstera won’t propagate
Not all of the components of your Monstera plant will reproduce to produce new Monstera offspring. This comprises:
- unconnected leaves without a stem
- roots or aerial roots that are not linked to stems
- stem devoid of leaves and no nodes
What will help a Monstera cutting establish quickly?
The cutting will establish itself in its own right more quickly the more portions of the plant it contains. As a result, while choosing where to cut, attempt to include:
- One or more leaves, as these contribute to the plant’s increased growth potential and quicker establishment.
- aerial roots or roots. In water or soil, aerial roots will produce ordinary roots as offshoots, which will improve the plant’s capacity to absorb nutrients and water. It’s typical for the thick, brown outer layer of the aerial roots to slough off, so don’t be alarmed.
Just keep in mind that nodes must be present on some piece of the stem; otherwise, trying to plant a leaf will fail.
Where can I find Monstera cuts for planting?
, you should separate each leaf and node on either side of the node/aerial root into independent segments.
The youngest leaf has a node that was still propagation-viable despite not having fully matured (you can kind of see it bumping through).
After you have separated your cuttings, you should remove any outdated sheathing from the leaf stems. When submerged in water for an extended period of time, they can decay and hinder the propagation process.
Your cuttings are now ready to go to their temporary residence. All you need is water and a vessel—I like clear ones.
It’s best to let the cuts to “heal” or dry up a little bit before immersing the cuttings in water. This only takes a little while.
The aerial root can be cut back, but I prefer to leave mine uncut. To make it sit comfortably at the bottom of my vessel, I simply delicately wrap it up.
The remaining stems are then arranged in the vessel, each one being spaced apart to allow for proper root development as well as aesthetic appeal once they are planted in soil. Due to their new root system, there isn’t much room to try to arrange them at that time.
Simply add water to completely cover the roots and ends once they are positioned how you like.
Place it somewhere bright, but not in the sun, and replace the water every three to five days. After roughly 2-3 weeks, roots should start to form!
In addition to new roots, it has also sprouted a huge number of new leaves.
Here is a picture of my very first effort at growing a monstera. I took the above steps, potted the cuttings in soil after around three months, and continued. It has thrived ever since I started watering it once a week!
Your inquiries are addressed:
Yes! Once they are in the proper light and receiving the appropriate amount of water, they are excellent for beginners and very simple to care for.
I plant them in a well-draining pot using ordinary Miracle Grow indoor potting soil. No need for moss or pearls.
Yes, to answer simply. That is a factor in the propagation process. I wouldn’t recommend making excessive or frequent cuts because you run the danger of harming the plant by putting it into shock.
It’s usually time for a new and larger pot when you can see the roots through the dirt or when you notice the growth has significantly halted.
All of my plants receive fertilizer during the growth season (April to September). I will fertilize every other week because I water them all once a week. I prefer liquid fertilizers (plant food) since I can regulate the amount that each plant receives.
In the summer, grocery stores like Kroger or your neighborhood Lowe’s or Home Depot may stock them. It’s always a good idea to check for nearby and online nurseries, such as
Expect no new leaf growth.
Monstera plants cannot develop from a single leaf cutting, unlike certain other plants like Sansevieria (Snake plant) and cactus.
Monstera plants grown without nodes will, regrettably, be unable to produce new leaf growth.
It lacks the tissue needed for cell division and the development of new leaves.
The leaf can survive without a node.
To keep turgid and fresh, the leaf will continue to absorb water by osmosis.
However, it must be situated in the optimal climate to prevent overheating and excessive transpiration, which would cause the leaf to wither.
Can Monstera be rooted in water?
The Monstera deliciosa can be easily rooted in water, just as many other plants. In addition to creating a stunning display piece, water propagation is a reasonably simple method of growing numerous new Monsteras with little effort. A few simple tools, a lot of sunshine, and lots of time are all you need.
You must locate a region of the Monstera deliciosa plant that has a node if you want to root it in water. Place the cutting in water in a location with bright, indirect light after using sharp shears to remove the plant beneath the node. After a few weeks, the cutting’s tip should start to sprout roots.
There is much more to this process than what is described above, but this quick summary gives you a decent idea of how simple it is to grow a Monstera in water. The remainder of the essay will cover the specifics of rooting a Monstera in water, what to expect from a cutting that has been propagated in this manner, and some advantages and disadvantages of water propagation.
Is it possible to grow Monstera without leaves?
A Monstera stem node can grow without a leaf. Only the plant’s food is produced by the leaves. Just make sure it’s in good shape. Even its green skin can provide some nourishment.
How much time does Monstera take to root in water?
You should plan on giving your Monstera cutting around 6 weeks before planting it in soil so that roots can form.
In order to guarantee a strong root system has established for a better chance of survival, I often advise waiting at least 2-3 months.
However, as long as you change the water frequently, clean the roots, and transfer the cutting into a larger jar as it grows, a Monstera can survive in water for many months (if not years).
It is prepared to be put in soil when a lovely cluster of roots fills your container.
You can plant your Monstera cutting as long as it has five roots that are at least several inches long.
Keep the Roots Clean
Keep an eye on the roots as they grow every week, and don’t be hesitant to cut off any sections that seem unhealthy.
You can clip out roots that appear to be rotting as long as there are numerous healthy-looking roots (white, yellow, light green, and light brown).
These are typically distinguished from the others by being dark, mushy, or significantly more slimy.
What should you do if a Monstera stem breaks?
Unfortunately, you can’t keep the attached leaves on that stem with it. By making a cut one inch (2,5 cm) above the closest node, you can remove the damaged Monstera stem. At that node, a new growth point will develop, and a new stem with leaves will emerge after a few months.
Put the stem in a vase with water if you don’t want to discard the damaged leaf. This will ensure that you have at least a few months to appreciate the leaf. To keep the leaf fresh, remember to replace the water frequently.
How should a broken Monstera leaf be handled?
DO NOT CUT OFF THE TOP LEAF OF YOUR MONSTERA AT THE BASE OF THE PETIOLLE IF IT HAS BLACK SPOTS (the stalk that holds the leaf up from the main stem). The top growth point, or terminal bud, is located on the top leaf petiole. The petiole’s side has a bump where the subsequent leaf will develop if you look attentively. Leave the stalk intact and only remove the leaf, allowing your Monstera’s new growth to continue to grow.
It has already generated a new leaf from its petiole for a lower leaf. A lower leaf’s connection to the main stem can be safely severed at the bottom of the leaf. The petiole may eventually die and fall off the stem if you leave some of it connected.
Monsteras with most leaves dead
Cutting off an excessive number of leaves at once can be harmful to a Monstera plant’s ability to recuperate if the bulk of the leaves are damaged. Keep any leaves with healthy green sections since plants require them to photosynthesize. To allow the plant to continue making energy from the remaining green leaves, first only remove the leaves that are the most severely injured or completely dead. If the remaining leaves continue to deteriorate, you can remove them later.
It’s still possible to rescue your plant even if all of its leaves are dead. An axillary bud, also known as a lateral bud, will activate and branch off to create a new leaf as long as the stem and roots stay in good condition. To activate several buds, you can also cut and propagate your Monstera as stem cuttings. This method should only be used as a last resort because it will be extremely slow without leaves.
Can I remove the aerial roots of Monstera?
A gentle, damp cloth or a fast shower with lukewarm water can be used to clean your monstera’s leaves, especially the oldest ones on the plant, to eliminate any dust accumulation.
Only two fertilizer applications will be required for your monstera throughout the entire year: one in early spring and one in late summer.
Your monstera plant will eventually develop aerial roots from its stem. These aerial roots are there to support the plant; do not cut them off. If any aerial roots are too short to support a climbing plant, train them back into the soil to absorb more nutrients when they are long enough.
How can you get water from Monstera into the ground?
You must transfer your cutting from the propagation media to soil after it is prepared. So that everything is ready to go, choose a pot and prepare your soil mixture beforehand.
Removing propagation medium
The propagation media should first be removed as much as you can without harming the roots. As a result, it will be simpler to plant your Monstera cutting because the roots will be free to assume the shape of their new container. Additionally, it guarantees they’ll have access to their new soil mixture.
It’s simple to remove the cutting for water. Work the roots gently free of additional materials, such as perlite or moss, and then allow the extra material fall off.
Because the root hairs of some plants, like moss, adhere to the medium, this can be a little tricky. Here are a few advices:
- Take the cutting out of its container, then submerge the roots with some water. The roots will release loose debris, which will float to the surface.
- First, separate the roots from the tips. To prevent breaking it, start at the tip of each root and work your way backward, untangling it a little at a time.
- When utilizing moss, pick a long-fibered kind of sphagnum moss of superior quality. This will enable you to remove it from the roots without breaking, pulling it loose in long chunks.
- Be tolerant! With time, even the most difficult root knot will unravel. Start with the simpler areas and return to the more challenging ones once the root ball has loosened.
Maintaining moisture at the cutting’s roots is crucial during the transition. The plant won’t be able to absorb water as well if the roots dry out since the root hairs will die. Roots that have been damaged or dried out can decay very fast. Leave the cutting submerged in water if you need to take a break from removing the roots to keep the roots moist.
Planting a Monstera cutting
Add one to two inches (2.55 cm) of your potting mix to the pot’s bottom. Place the cutting in the pot while holding it in the desired sitting position. After that, cover the roots completely with soil mix, leaving about 1 inch (2.5 cm) of space at the top of the container to prevent soil from spilling.
Avoid packing the soil mixture tightly around the roots. If there are any air spaces, gently poke the dirt there with a chopstick. By doing this, you can re-distribute the dirt without compacting it around the roots using the chopstick’s tip.
How deep to plant a monstera cutting
It is best to keep the stem and nodes of your Monstera above the earth, just like when you are spreading it. This enables you to keep a closer check on the stem and helps prevent stem rot.
Sometimes the plant won’t be able to stand erect without burying some of the stem, depending on the shape of your roots and your cutting. It’s acceptable in this instance; just watch out for overwatering. To ensure that I can still see a buried stem even though it is hidden, I like to place the cut end of the stem next to the edge of my clear pot.
Watering a newly planted Monstera cutting
Make sure to water a Monstera cutting as soon as you plant it! Keep in mind that during the transition we want the roots to stay wet. Water until all of the soil is moist and droplets appear in the drainage holes in the bottom of your pot.
It’s crucial to water your cutting again after planting. Keep a tight check on your new plant, and don’t wait until the soil is completely dry before giving it some additional water. Your Monstera needs a continually wet atmosphere as it adjusts. This is crucial if you wish to plant a Monstera cutting directly into the ground.
You can begin introducing the plant to a regular watering regimen after the second treatment. If you are using a clear container, check the soil for fresh root growth to make sure your plant is healthy and doing well in its new environment.
For the best Amazon items for caring for your Monstera plants, go here. To save you time, we investigated the items, read through the reviews, and even tested them. Our own Monstera (Deliciosa, Adansonii, and Albo Variegata) plants use these identical items, and Instagram users love them!